ecu ground
Moderators: Helpinators, Moderators
ecu ground
i been seeing threads about the ecu ground. so iwent and looked under the hood and i didnt see a ground wire under the intake which bundle connector should i look for a ground wire for the ecu
-
- Third Gear
- Posts: 729
- Joined: Wed Mar 28, 2012 1:14 am
- Location: Colorado
Re: ecu ground
I believe it goes to the ground on the back of the intake manifold driver side
Re: ecu ground
i saw that part but i didnt see a ground wire unless its hidden real good. i 'm trien to trace it from the wire bundle to the intake so i can make sure its there and a good ground
Re: ecu ground
Did you see my post here?
http://bbs.legacycentral.org/viewtopic. ... 81#p409381
The ground wiring is part of the harness and can be rather difficult to see.
http://bbs.legacycentral.org/viewtopic. ... 81#p409381
The ground wiring is part of the harness and can be rather difficult to see.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: ecu ground
i seen your pic then checked my car and didnt see any wires . which harness plug should i trace? i got a another ecu on the way and i wanna cover all the bases.