rob tune help

Headlights to tailights and everything in between.

Moderators: Helpinators, Moderators

Post Reply
Subiepoo11
First Gear
Posts: 82
Joined: Sun Jun 01, 2008 3:14 am
Location: Denver, Colorado
Contact:

rob tune help

Post by Subiepoo11 »

Bought a rob tuned ecu with 550 injectors. Got everything installed and the car is running very rich ar idle according to my a\f gauge. Cel is flashing with a code 45, legacy service manual says thats an atmospheric pressure sensor. Im not what that code is in the 20g ecu. Want to here what you guys thinl. Can explain more if needed. Thanks
93 SS 253K: 16g 550s 06 tmic 3'' tbe mbc custom intake rob tuned 16psi 5 speed swap H&R springs gr2's wrx wheels. 14.4 @ 94.4 mph at 5280.

07 STI 54k: Daily driver, stock for now.
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: rob tune help

Post by Legacy777 »

Code 45 is also the MAP sensor or the pressure exchange solenoid. It's the same code number between the turbo legacy and 20g ecu.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Subiepoo11
First Gear
Posts: 82
Joined: Sun Jun 01, 2008 3:14 am
Location: Denver, Colorado
Contact:

Re: rob tune help

Post by Subiepoo11 »

If that sensor was bad would it cause the computer to dump a bunch of fuel in. It was working before i swapped everything. Should i try replacing it...
93 SS 253K: 16g 550s 06 tmic 3'' tbe mbc custom intake rob tuned 16psi 5 speed swap H&R springs gr2's wrx wheels. 14.4 @ 94.4 mph at 5280.

07 STI 54k: Daily driver, stock for now.
dankberries
Second Gear
Posts: 506
Joined: Thu Oct 27, 2011 5:09 am
Location: Dirt Roads, Colorado

Re: rob tune help

Post by dankberries »

I think this code comes up if you didn't remove pin 48.5 and combine it to a ground I believe.
93 impreza rally muffin
93 legacy ss Tarmac Terminator
89 Nissan 240sx sr20
90 Nissan 240sx 2jz
killajamal wrote:Dank is actually German for "silly term which the kids have come up with to describe exceptionally choice marijuana.''
Subiepoo11
First Gear
Posts: 82
Joined: Sun Jun 01, 2008 3:14 am
Location: Denver, Colorado
Contact:

Re: rob tune help

Post by Subiepoo11 »

Ok so I grounded that pin, flashing CEL is out. But the car is still running really rich. Low 12s at idle, 11s when cruising and it's in the low 10s when I start to get into boost with lots of black smoke. Is this thing gonna have to go through a relearn procedure?
Alphius
Fourth Gear
Posts: 1204
Joined: Mon Aug 31, 2009 9:09 pm
Location: Rochester, WA

Re: rob tune help

Post by Alphius »

Did you buy the ECU from Rob or someone else? Is it tuned for the 550 injectors? Is it possible your 550s are modded for more flow by someone? Do you have any leaks in your intake tract after the MAF? Did you put in a plastic JECS MAF instead of the metal Hitachi?
Subiepoo11
First Gear
Posts: 82
Joined: Sun Jun 01, 2008 3:14 am
Location: Denver, Colorado
Contact:

Re: rob tune help

Post by Subiepoo11 »

I bought it from rob himself. Tuned for the 550s. I checked all my intake lines after the maf cause i thought it could have been that. Im using the jecs green label maf. For the injectors, the first set i bought i was gonna send them to witch hunter but they were moving shop at the and werent taking anymore injectors. So i sent them to this place called injector rx. They had good reviews, so i said what the hell. Got them back car was only running on one cylinder. Tested all the injectors with a 9v battery to see if you could hear them click and what not. 3 werent clicking even when i sprayed them with some brake clean to lude the insides. Bought another set in town all 4 worked this time. Put those in car runs smooth but my a/f gauge says its super rich. Im not sure if there modded or not but the tips on the second set i got were a little different. The guy said they were from and 04 sti.
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: rob tune help

Post by Legacy777 »

This is what the 04 "yellow" STi injectors & tips should look like. Do they look like that?

http://www.main.experiencetherave.com/s ... injectors/
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Subiepoo11
First Gear
Posts: 82
Joined: Sun Jun 01, 2008 3:14 am
Location: Denver, Colorado
Contact:

Re: rob tune help

Post by Subiepoo11 »

The first set i got looked those. The second set i got, the tips look like the red injectors but their yellow. I can take pics later when i get home.
Subiepoo11
First Gear
Posts: 82
Joined: Sun Jun 01, 2008 3:14 am
Location: Denver, Colorado
Contact:

Re: rob tune help

Post by Subiepoo11 »

This is what the second set looks like. Can't figure outgrow to upload pics on here. Hopefully this link will work.



http://instagram.com/gotdankums
93 SS 253K: 16g 550s 06 tmic 3'' tbe mbc custom intake rob tuned 16psi 5 speed swap H&R springs gr2's wrx wheels. 14.4 @ 94.4 mph at 5280.

07 STI 54k: Daily driver, stock for now.
Subiepoo11
First Gear
Posts: 82
Joined: Sun Jun 01, 2008 3:14 am
Location: Denver, Colorado
Contact:

Re: rob tune help

Post by Subiepoo11 »

When i was looking online some peolpe said their nismo 555cc injectors. What do you guys think.
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: rob tune help

Post by Legacy777 »

They could be.....I don't recognize the front injector tips.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Alphius
Fourth Gear
Posts: 1204
Joined: Mon Aug 31, 2009 9:09 pm
Location: Rochester, WA

Re: rob tune help

Post by Alphius »

An increase of 5cc would not make the car run that badly. That difference is within normal variation. I don't know enough to tell if those injectors are STI that are modded for more flow. As you said they could also be some other kind of injector completely.
wtdash
Fifth Gear
Posts: 2346
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Re: rob tune help

Post by wtdash »

This PIC is of your style that DW/ DeatschWerks mods out to 850cc. They are stock injectors that are modded to flow more.
Image

Maybe the STi owner's car had the modded stock injectors? But I don't think the car would even start, let alone run, if they were modded.

I'd contact DW and ask them if they ADD those tips or not.

Not sure what else to suggest.
Td
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
Subiepoo11
First Gear
Posts: 82
Joined: Sun Jun 01, 2008 3:14 am
Location: Denver, Colorado
Contact:

Re: rob tune help

Post by Subiepoo11 »

Ill have to give them a call. I talked to guy that cleaned the first set i have. So i sent them back to him, and their on the way back to me. Hopefully they fixed them rhis time. Thanks for the help guys.
Subiepoo11
First Gear
Posts: 82
Joined: Sun Jun 01, 2008 3:14 am
Location: Denver, Colorado
Contact:

Re: rob tune help

Post by Subiepoo11 »

Ok it's been awhile. So I got everything sorted out a few weeks ago. I sent the first set of injectors back to the place that cleaned them. The dude was totally cool and wanted to help. He recleaned them and now the car halls ass. My buddy has a stage 2 wrx and he's all jealous cause my legacy pulls on him. I'm happy with rob and his tune.
93 SS 253K: 16g 550s 06 tmic 3'' tbe mbc custom intake rob tuned 16psi 5 speed swap H&R springs gr2's wrx wheels. 14.4 @ 94.4 mph at 5280.

07 STI 54k: Daily driver, stock for now.
rob
First Gear
Posts: 183
Joined: Thu Jun 26, 2003 5:44 pm
Location: Puyallup WA
Contact:

Re: rob tune help

Post by rob »

Excellent, thanks for follow-up post and glad you like the tune.

-Rob
Post Reply