Transmission code question

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
andyyyy
In Neutral
Posts: 16
Joined: Thu Jul 25, 2013 2:46 am

Transmission code question

Post by andyyyy »

I have a 92 turbo wagon and just got done swapping out the tranny and am getting an error code from the power mode light. It's flashing 16 times when ever I start up the car. Everything seams to be working normally but i cant find what code 16 is. If any one knows where to find this code or what it is it would help a ton. Thanks
wtdash
Fifth Gear
Posts: 2346
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Re: Transmission code question

Post by wtdash »

Hi,
Here's the link....http://www.surrealmirage.com/subaru/trans.html

Post back what codes you find.


BTW, You can use the Search - Google bar @ the top to find most everything on here.

GL
TD
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
andyyyy
In Neutral
Posts: 16
Joined: Thu Jul 25, 2013 2:46 am

Re: Transmission code question

Post by andyyyy »

Ok I checked it and it was showing 33 which is the 2 speed sensor, which makes sense because my speedometer stopped working. When you turn on your car and the power light is flashing that is not a code which is what threw me off it blinks 16 times no matter what.
Legacy777
Site Admin
Site Admin
Posts: 27890
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Transmission code question

Post by Legacy777 »

Check the speedo cable or more likely the base piece for the speedo cable. It screws into the trans and commonly fails.

Image
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply