06 wrx downpipe questions?

Headers, cats, uppipes, downpipes, midpipes and mufflers.

Moderators: Helpinators, Moderators

Post Reply
TurboGeneration
In Neutral
Posts: 11
Joined: Mon Mar 17, 2014 6:55 am
Location: Gresham, OR

06 wrx downpipe questions?

Post by TurboGeneration »

My Co worker is giving me a 06 stock wrx downpipe, so my question is...how well do those fit a 94 legacy ss? Also I'm swapping over a TD04 with it.
Also...side note...anyone have a spare ICV I can buy off of you?

mike-tracy
Moderator
Moderator
Posts: 4972
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: 06 wrx downpipe questions?

Post by mike-tracy »

You can install it, but the 06 WRX DP isn't an upgrade to the SS one. Has the same size pipes. Plus the flange at the bottom points the midpipe more towards the ground so the exhaust hangs lower if that makes sense.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote:
Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.

TurboGeneration
In Neutral
Posts: 11
Joined: Mon Mar 17, 2014 6:55 am
Location: Gresham, OR

Re: 06 wrx downpipe questions?

Post by TurboGeneration »

TurboGeneration wrote:My Co worker is giving me a 06 stock wrx downpipe, so my question is...how well do those fit a 94 legacy ss? Also I'm swapping over a TD04 with it.
Also...side note...anyone have a spare ICV I can buy off of you?
Really? Glad you told me that. So is the TD04 turbo just a clean swap with the current piping?

ride_child
Third Gear
Posts: 889
Joined: Thu May 03, 2012 6:24 am
Location: Enumclaw, WA
Contact:

Re: 06 wrx downpipe questions?

Post by ride_child »

the only difference between the vf11 and the tdo4 is the compressor inlet. the tdo4 is clocked at 90 degrees where the vf11 is clocked at 45 degrees. other than that its the same.
Kris

'91 Mica White SS - R.I.P.
'88 White RX Turbo sedan - SOLD
'91 Black SS - SOLD
'93 Silver Turbo Wagon - Hibernation/Project Mode
'91 Black Camry Alltrac - R.I.P.
'09 DGM Forester XT Limited - Daily

TurboGeneration
In Neutral
Posts: 11
Joined: Mon Mar 17, 2014 6:55 am
Location: Gresham, OR

Re: 06 wrx downpipe questions?

Post by TurboGeneration »

ride_child wrote:the only difference between the vf11 and the tdo4 is the compressor inlet. the tdo4 is clocked at 90 degrees where the vf11 is clocked at 45 degrees. other than that its the same.

Oh okay. That's not a problem. So fix my ICV and then swap the turbo over and I should be rocking. And also have a IC.

cj91legss
Fifth Gear
Posts: 6310
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: 06 wrx downpipe questions?

Post by cj91legss »

The inlet is different between the turbos as well. It requires a sillocone elbow.

Sent from my SGH-T889 using Tapatalk
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

TurboGeneration
In Neutral
Posts: 11
Joined: Mon Mar 17, 2014 6:55 am
Location: Gresham, OR

Re: 06 wrx downpipe questions?

Post by TurboGeneration »

cj91legss wrote:The inlet is different between the turbos as well. It requires a sillocone elbow.

Sent from my SGH-T889 using Tapatalk

What size and angle?

cj91legss
Fifth Gear
Posts: 6310
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: 06 wrx downpipe questions?

Post by cj91legss »

Need a 90 degree elbow and it needs to be 2.25"

Sent from my SGH-T889 using Tapatalk
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

TurboGeneration
In Neutral
Posts: 11
Joined: Mon Mar 17, 2014 6:55 am
Location: Gresham, OR

Re: 06 wrx downpipe questions?

Post by TurboGeneration »

cj91legss wrote:Need a 90 degree elbow and it needs to be 2.25"

Sent from my SGH-T889 using Tapatalk
You've been helpful. I'll start my turbo swap right after I find a shop to rebuild the TD04. Even though it only has 60k on it

cj91legss
Fifth Gear
Posts: 6310
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: 06 wrx downpipe questions?

Post by cj91legss »

Read thru the stickies at the top of the Turbo section. there are a could of write ups on how to do the install.

This will help you plan for what will come up and what you may need from the parts store. I say will come up, because it's a 20 year old car, you will likely break something...

Also, a heat gun on the harder rubber hoses will be your best friend.
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

Post Reply