Headlights to tailights and everything in between.
Moderators: Helpinators , Moderators
imtb
First Gear
Posts: 51 Joined: Sat Jan 17, 2015 3:04 pm
Post
by imtb » Fri Jan 30, 2015 3:46 am
My alternator was getting noisy and I bought an O Rileys and installed and my battery light was on, on first start up. Returned O Rileys for bearings and rebuilt installed new brearings and nice and smooth.
Here are few pics
Notice small wire to hold brushess in to install armature.
imtb
First Gear
Posts: 51 Joined: Sat Jan 17, 2015 3:04 pm
Post
by imtb » Fri Jan 30, 2015 3:49 am
I still have some howling or whinning bearing sounds. I am replacing Power steering pump next.
Legacy777
Site Admin
Posts: 27926 Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Post
by Legacy777 » Fri Jan 30, 2015 7:07 pm
Thanks for sharing the pictures!
You may just have a bearing going on the power steering and can replace the bearing and refresh the seals.
Here's my thread with pictures & info.
http://bbs.legacycentral.org/viewtopic.php?t=24143
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
imtb
First Gear
Posts: 51 Joined: Sat Jan 17, 2015 3:04 pm
Post
by imtb » Tue Feb 03, 2015 3:38 pm
I am still having issues with the alternator. It is getting very hot after short drive. So not sure what is gong on with it.
I am going to upgrade to 2005-2009 legacy alternator.
imtb
First Gear
Posts: 51 Joined: Sat Jan 17, 2015 3:04 pm
Post
by imtb » Mon Feb 09, 2015 4:36 am
Ended up upgrading to 2005 -2009 legacy alternator, didnt like the rebuilt one getting so hot.
This one is 90 amp and is putting out 14v.