07 WRX TMIC & TD05H-16G installation guide
Moderators: Helpinators, Moderators
Re: 07 WRX TMIC & TD05H-16G installation guide
So basically move the Ftube around and make it fit as best as possible? the TBPS and the coils wires etc. i test fitted the TD05 and it looked like the Intercooling pipe was not even close o.O
Re: 07 WRX TMIC & TD05H-16G installation guide
Yes, move the f-tube so it clears the turbo and intercooler. It doesn't have the stay in the same orientation as OEM -- just as long as the lines go to their correct destinations as OEM.
As stated in the guide, you'll need to modify any Y-tubing you purchase to make it work with any 90* clocked turbo (td04, td05, vf39, etc) and our cars.
As stated in the guide, you'll need to modify any Y-tubing you purchase to make it work with any 90* clocked turbo (td04, td05, vf39, etc) and our cars.
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Re: 07 WRX TMIC & TD05H-16G installation guide
Coolant lines stayed in the same place.
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
-
- In Neutral
- Posts: 17
- Joined: Tue Jul 13, 2010 7:02 am
- Location: SLC, UT
Re: 07 WRX TMIC & TD05H-16G installation guide
I think this y pipe set up would work, any opinions?
http://cgi.ebay.com/ebaymotors/Top-Moun ... 5ade44bf3c
http://cgi.ebay.com/ebaymotors/Top-Moun ... 5ade44bf3c
Re: 07 WRX TMIC & TD05H-16G installation guide
I just installed that exact same kit, it works way better than the Perrin one I had before.
you really can't beat it for the price. but i would recommend getting a slightly longer piece of straight silicone it makes life alot easier .
you really can't beat it for the price. but i would recommend getting a slightly longer piece of straight silicone it makes life alot easier .
Kris
92 SS, ej20g, camo wrap, 16g, 06 intercooler,
Robtune, 550s
92 SS, ej20g, camo wrap, 16g, 06 intercooler,
Robtune, 550s
Re: 07 WRX TMIC & TD05H-16G installation guide
I was looking at that y-pipe kit too, and if you have pictures of it installed to share, that would be great. I was thinking about this one, for a GC8 WRX? I found this style on eBay and it looks like the lower leg to the turbo is longer. That might be able to make up the extra length needed instead of the extra set of clamps and the metal pipe.
Ebay Item number: 300381786957
$110.00
Ebay Item number: 120511544072
$65.00
What do you guys think about that?
Ebay Item number: 300381786957
$110.00
Ebay Item number: 120511544072
$65.00
What do you guys think about that?
-
- In Neutral
- Posts: 17
- Joined: Tue Jul 13, 2010 7:02 am
- Location: SLC, UT
Re: 07 WRX TMIC & TD05H-16G installation guide
just got the kit today and I get what you mean by needing a longer piece. When i bolt the 2 pieces on the the 07 topmount they're offset so the short piece of piping won't really work.legacylok wrote:I just installed that exact same kit, it works way better than the Perrin one I had before.
you really can't beat it for the price. but i would recommend getting a slightly longer piece of straight silicone it makes life alot easier .
Re: 07 WRX TMIC & TD05H-16G installation guide
What sizes are we talking for the 90 Degree bend and the 2" piece of silicone tubing 2 inch?
1996 Subaru Legacy L
1993 Subaru Legacy SS
1992 Subaru Legacy L
1990 Subaru Legacy L
1993 Subaru Legacy SS
1992 Subaru Legacy L
1990 Subaru Legacy L
-
- Fifth Gear
- Posts: 6322
- Joined: Fri Jun 20, 2008 8:17 am
- Location: Lakewood, Wa 98439
- Contact:
Re: 07 WRX TMIC & TD05H-16G installation guide
for the 90 degree bend I think you'll want a 1.75' to 2" reducer. For the 2" piece of silicone, you want 2"........
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
Re: 07 WRX TMIC & TD05H-16G installation guide
I don't see a 1.75" to 2" reducer. I see the 2.5" to the 1.75" thats about it on silicone intakes.
1996 Subaru Legacy L
1993 Subaru Legacy SS
1992 Subaru Legacy L
1990 Subaru Legacy L
1993 Subaru Legacy SS
1992 Subaru Legacy L
1990 Subaru Legacy L
-
- Fifth Gear
- Posts: 6322
- Joined: Fri Jun 20, 2008 8:17 am
- Location: Lakewood, Wa 98439
- Contact:
Re: 07 WRX TMIC & TD05H-16G installation guide
Thats only if yoire using the vf11 tho. If youre doing the td05 you dont need the 45 degree bend. Sorry, I should have been more accurate.
You just need the 02-05 y pipe kit and a small piece of 2" pipe. And longer piece of 2" silicone.
Sent from my SGH-T989 using Tapatalk 2
You just need the 02-05 y pipe kit and a small piece of 2" pipe. And longer piece of 2" silicone.
Sent from my SGH-T989 using Tapatalk 2
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
Re: 07 WRX TMIC & TD05H-16G installation guide
Bought a 2.25" 90 degree bend for the TD04. This is for where it connects to the factory intake. This the right size? Talking about the area circled in red off the turbo.
1996 Subaru Legacy L
1993 Subaru Legacy SS
1992 Subaru Legacy L
1990 Subaru Legacy L
1993 Subaru Legacy SS
1992 Subaru Legacy L
1990 Subaru Legacy L
-
- Fifth Gear
- Posts: 6322
- Joined: Fri Jun 20, 2008 8:17 am
- Location: Lakewood, Wa 98439
- Contact:
Re: 07 WRX TMIC & TD05H-16G installation guide
yes
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
-
- Second Gear
- Posts: 419
- Joined: Tue Jul 06, 2010 7:47 am
- Location: Spokane, WA
Re: 07 WRX TMIC & TD05H-16G installation guide
I see someone asked before but have not found any info on anyone trying the silicone y pipe for a GC8 wrx. Whether it would be 93-95 or 96-00? I looked up pictures of a 95-96 jdm wrx and it had the slanty intercooler and uses a similar manifold to the EJ22t so the distance of the throttle body and firewall looks to be the same. So, the distance from the turbo outlet and intercooler inlet would be right on but I have never seen a slanty intercooler to see how the y pipe matches up with it. So the question is, would a silicone y pipe meant for a jdm GC8 wrx work with a 06/07 wrx intercooler on an EJ22t with the TD05? I may have to purchase one to find out if no one else has tried it.
93 Black Legacy SS
93 Legacy
97 Outback- EJ25D/22e frankenmotor
97 Green Outback
97 Red Legacy GT
98 Silver Legacy GT- Pikes Peak build, built EJ22t/205, GT3076r
99 Black Legacy GT wagon
93 Legacy
97 Outback- EJ25D/22e frankenmotor
97 Green Outback
97 Red Legacy GT
98 Silver Legacy GT- Pikes Peak build, built EJ22t/205, GT3076r
99 Black Legacy GT wagon
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: 07 WRX TMIC & TD05H-16G installation guide
Pics stopped working
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
Re: 07 WRX TMIC & TD05H-16G installation guide
I'd suggest trying send the original post an email or PM to see if he still has the pictures.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: 07 WRX TMIC & TD05H-16G installation guide
Did anyone have any luck with this one? Motor is about to go in and I want to be able to put the intercooler in soon too.
http://www.grimmspeed.com/top-mount-int ... it-subaru/
http://www.grimmspeed.com/top-mount-int ... it-subaru/
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: 07 WRX TMIC & TD05H-16G installation guide
Wtdash and others tried that one. Worked good on the 02-05 tmic, the short silicone piece is horribly kinked on the 06-07. Unless they make an updated one specifically for your tmic i wouldnt bother.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: 07 WRX TMIC & TD05H-16G installation guide
Ok thanks
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
Re: 07 WRX TMIC & TD05H-16G installation guide
Pics have been fixed.RckyMtnLegacy wrote:Pics stopped working
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: 07 WRX TMIC & TD05H-16G installation guide
Well this is an exciting day!!
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador