Where the power meets the road.
	Moderators:  Helpinators , Moderators 
			
		
		
			
				
																			
								turbonator 							 
						Second Gear 			
		Posts:  283  		Joined:  Sun Oct 12, 2003 5:57 am 		
		
											Location:  Ottawa 
							
						
		 
		
						
					
													
							
						
									
						Post 
					 
								by turbonator   »  Mon Feb 02, 2004 3:03 am 
			
			
			
			
			
			I hope its just a line 
  
 I noticed it early saturday morning and by late afternoon I had next to no brake pressure.
The pedal goes right to the floor It will slow down but I have to give it a lot of room.
 
			
			
									
						
										
						 
		 
				
		
		 
	 
				
		
		
			
				
																			
								Legacy777 							 
						Site Admin 			
		Posts:  27932  		Joined:  Tue Oct 15, 2002 11:37 am 		
		
																										Location:  Houston, Tx 
							
							
				Contact: 
				
			 
				
		 
		
						
					
						 
		 
													
							
						
									
						Post 
					 
								by Legacy777   »  Mon Feb 02, 2004 3:20 am 
			
			
			
			
			
			have you visually inspected everything?   Did it all of a sudden happen?
			
			
									
						
							Josh
surrealmirage.com/subaru 
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm  			
						 
		 
				
		
		 
	 
				
		
		
			
				
																			
								turbonator 							 
						Second Gear 			
		Posts:  283  		Joined:  Sun Oct 12, 2003 5:57 am 		
		
											Location:  Ottawa 
							
						
		 
		
						
					
						 
		 
													
							
						
									
						Post 
					 
								by turbonator   »  Mon Feb 02, 2004 7:14 pm 
			
			
			
			
			
			I am going in for an oil change tomorrow so I will take a good look then. 
 
My car was fine saturday morning then by noon I had lost a little brake pressure and by late afternoon no brakes at all.
			
			
									
						
										
						 
		 
				
		
		 
	 
				
		
		
			
				
																			
								EJ22TGC8 							 
						In Neutral 			
		Posts:  26  		Joined:  Tue Dec 02, 2003 7:24 am 		
		
						
						
		 
		
						
					
						 
		 
													
							
						
									
						Post 
					 
								by EJ22TGC8   »  Thu Feb 12, 2004 6:03 am 
			
			
			
			
			
			Check all of the banjo fittings as well as the bleeder valves and make sure that they are tight. Same thing happened to me and it was one of my banjo fittings.
			
			
									
						
										
						 
		 
				
		
		 
	 
				
		
		
			
				
																			
								ciper 							 
						Knowledgeable 			
		Posts:  4388  		Joined:  Tue Oct 15, 2002 8:16 pm 		
		
											Location:  SFCA 
							
						
		 
		
						
					
						 
		 
													
							
						
									
						Post 
					 
								by ciper   »  Thu Feb 12, 2004 6:05 am 
			
			
			
			
			
			May sound dumb, check the vacuum line.