My dash / tail / parking lights went out.
Investigating, I've discovered a bad contact in a plug that reaches the cabin fuse box.
Then, the dash lights came on, but tail and parking lights only work on the right side of the car (the bulbs are fine).
I took off the plug and it's partially melted (pics bellow).
I believe the reason was due to a cheap DLR system with chinese 18w led bars that was plugged directly into the parking lights wiring (now gone).
Well, how to address this melted plug now? Or, will I ever be able to fix this?
I can't use the car at night as just one side have tail / parking lights, so it's pretty bad. The engine, however, is running superb (EJ22).
So, help, I need to get this fixed. Is it fixable? How?
I know if it was a plug-to-plug connection I could just cut and bypass this melted wire. However, this pkug connects directly with the fuse box (joint box).
Thanks a lot.
![Image](http://i936.photobucket.com/albums/ad210/fotopaisagem/wagon/chicote%20luz%20painel%20traseira/IMG_2217_zpsh1xrdebn.jpg)
![Image](http://i936.photobucket.com/albums/ad210/fotopaisagem/wagon/chicote%20luz%20painel%20traseira/IMG_2216_zpsscnlggmb.jpg)