RckyMtnLegacy's 93 Turbo...On the Road Finally!
Moderator: Moderators
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Where are these coming from? I can take a look at my car.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Pic 1 is of 2 circle connectors to one 4 pin. One connector comes from behind the pressure solenoid?
I am thinking the second connector is the cruise control pump which I deleted so I'm thinking I don't need to worry about it
I am thinking the second connector is the cruise control pump which I deleted so I'm thinking I don't need to worry about it
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Maybe I'm not following the pictures, but are you wanting to know where the circle connectors go or the one rectangular one?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
So I figured out both last night. the MAP circle connectors fit perfectly into the MT harness so while I was plugging everything in (what feels like years ago) I plugged the T harness for the MT into those and this made a 4pin connector appear that has no home. Unplugged the harness and plugged them into each other. Still no start....Looked at timing and I thought it looked right but we wanted to rule it out since it looked like it was possibly a tooth off, after removing belt we could not get everything to line up for 2 hours so we gave up and went home.
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Ok, keep us posted. Hopefully you can get everything back together. I use clamps similar to this to hold the timing belt onto the cam gears so you can get everything timed properly.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Timing is now set. Had a nice diag night but still no go. We are not getting reference voltage from the ECU for the crank sensor. Thinking ECU might need replaced now so looking for one if anybody has one for sale.
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
So she runs!!! More info to come just wanted You all to know first
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Great News!RckyMtnLegacy wrote:So she runs!!! More info to come just wanted You all to know first
Sent from my iPhone using Tapatalk
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Here is the main gist the crank sensor wiring was at fault. I had only one harness connector for the CS so I had to use what wiring was left of it. I bought 100ft of shielded 2 wire cable to bypass the harness wiring and go straight to the ECU. Still no start, cranked only. We checked all wiring and it seemed fine but could got no signal and injectors no pulse. From everything I could find and remembered the CS gets 5v reference from the ECU...but after a month of research I found out it doesn't which is good because we almost condemned the computer. The crank sensor only sends millivolts to the ECU. Once we found this out we went through the CS wiring and at the connector I made earlier I had used liquid electrical tape since it was so brittle. Come to find out liquid electrical tape has small bits of metal in it and when you need to send tiny volts any metal across the wires could cause signal to be disrupted. Once wires were fixed the car started, still has a rough idle and will die after a bit but it runs.
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Thinking my TPS is bad, going to try my spare
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Third Gear
- Posts: 610
- Joined: Sat Mar 22, 2014 3:10 am
- Location: Northern Virginia, USA
- Contact:
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Nice dude! Stoked to hear it's alive!
Parts Needed:
Manual Cluster
Front & Rear bumper Chrome Trim
Manual Cluster
Front & Rear bumper Chrome Trim
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Finally able to take it on the road!! Had to fix an overheating issue, idle issue, brake issue but have been taking it out for about 45 min each day to stretch her legs. Current issue is I am not able to get power past 3500 RPMs, it just cuts out . Feels like fuel cut or boost cut. Ordered gauges and looking for a boost controller.
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Getting codes 22, 23, 24
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Is the MAF plugged in securely and it's wiring not frayed?
Is the knock sensor crack free, and it's little wiring intact?
Also, have you adjusted the iacv onto spec?
I'll bet at least one is a legit code
Is the knock sensor crack free, and it's little wiring intact?
Also, have you adjusted the iacv onto spec?
I'll bet at least one is a legit code
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
MAF wiring is good
Installing a new knock sensor just cause
I have not nor do I know how to adjust have
I also have been roll g with no Speedo cable and am thinking this is causing issues if the ecu reads the input.
Installing a new knock sensor just cause
I have not nor do I know how to adjust have
I also have been roll g with no Speedo cable and am thinking this is causing issues if the ecu reads the input.
Last edited by RckyMtnLegacy on Thu May 10, 2018 3:50 am, edited 1 time in total.
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Yeah no speedo cable will 100% put it in a minor limp mode. if you like it now, it's so much smoother once that's working.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Can i use the auto cable with manual trans?
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
NM I got it to snap into the adapter just need to install it now
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
The auto one is a different length, but I heard of people successfully using it. Glad you got it snapped in.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Speedo cable installed and new knock sensor. Getting codes 22 and 24 but 23 went away. I am going to try and clear them to see if they stay on. Still getting cut off around 3500 RPMs but feels like its getting beter
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Ran the green connector test and got 22, 43, 51. The knock sensor is new so possibly the wiring? Not getting any info on the code 43.
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
Possibly the knock sensor wiring. I had one tiny strand of shielding touching the signsl wire when I fixed my KS plug. About went crazy sorting that out.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
I'll try that first. Just got boost gauge and wideband so I'll be installing those shortly as well
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Third Gear
- Posts: 735
- Joined: Sun Aug 06, 2006 6:25 am
- Location: Littleton, CO
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
While installing gauges I repaired the shielded knock sensor connector and CEL was not flashing at me on my quick test drive but I will do full test tomorrow.
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy
"Straight roads are for fast cars. turning roads are for fast drivers"
Official Subaru Ambassador
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: RckyMtnLegacy's 93 Turbo...EJ20G swap in progress!!
alright! That's encouraging!
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.