STi Shifter trim?

BAC5.2 · Post by **BAC5.2** » Fri Feb 13, 2004 9:54 pm

Does anyone have any idea if the STi shifter trim and boot will bolt onto a Turbo?

I have a feeling it will, or can be made to easily fit, but I wanted to know if anyone had done the swap?

I have a feeling the parts are going to cost an arm and a leg from Subaru, so I want to be fairly certain before I drop the coin on the parts.

LaureltheQueen · Post by **LaureltheQueen** » Fri Feb 13, 2004 11:47 pm

I can measure art's tomorrow.

BAC5.2 · Post by **BAC5.2** » Sat Feb 14, 2004 12:47 am

That would be awesome!

I am definately stopping by the Subaru dealership if it'll fit.

Yukonart · Post by **Yukonart** » Mon Feb 16, 2004 3:28 am

Hmmm. . . I'll measure tonight on my lunchbreak.

BAC5.2 · Post by **BAC5.2** » Mon Feb 16, 2004 3:30 am

Awesome dude, I'd appreciate it.

I am going to be STOKED if it fits. Anything to get rid of this ugly ass rubber boot.

LaureltheQueen · Post by **LaureltheQueen** » Mon Feb 16, 2004 4:00 am

oops

i forgot. sorry guys.

I'm blaming it on the food. wiped my memory

Yukonart · Post by **Yukonart** » Mon Feb 16, 2004 4:07 am

LaureltheQueen wrote:oops

i forgot. sorry guys.

I'm blaming it on the food. wiped my memory

That WAS a good dinner. . .

S'all good. . . we didn't have a lot of time, yesterday.

vrg3 · Post by **vrg3** » Mon Feb 16, 2004 4:09 am

I would be surprised if it fit easily, just from my experience with BC/BF shifter trim and looking at this thread on ScoobyMods:

http://www.scoobymods.com/forums/showth ... readid=467

I think you should just get a generic leather boot and adapt it yourself.

BAC5.2 · Post by **BAC5.2** » Mon Feb 16, 2004 4:57 am

vrg3 wrote:I would be surprised if it fit easily, just from my experience with BC/BF shifter trim and looking at this thread on ScoobyMods:

http://www.scoobymods.com/forums/showth ... readid=467

I think you should just get a generic leather boot and adapt it yourself.

I was mainly just trying to get the trim peice. The boot is easy, Momo makes a bood that looks pretty decent and can easily be used.

It's just kind of hard to find a boot that doesn't have Velcro or yellow somewhere on it. I am very big on the factory look.

Ideally, I want my shifter to end up looking similar to that in a Volkswagen Passat W8 6MT. Shifter sunk in a bit with the console, but high enough so you arent reaching DOWN into the console to shift. It's the perfect height and the perfect throw. Appropriate for the fastest AWD sedan of that size that I have ever driven.

On a side note:

I suggest a test drive of a VW Passat W8 with the 6MT some time. It's truely an exhilirating car. Possibly the smoothest revving 8 cylinder engine I've ever driven. The thing HAULS for a car of it's size. It's truely a joy to drive.

Yukonart · Post by **Yukonart** » Mon Feb 16, 2004 6:03 am

Here are the closest dimensions I could get for you:

Width at top outside: 5 3/4 inches
Width at top inside: 4 1/2 inches
Width at bottom outside: 4 3/4 inches
Width at bottom inside: 3 1/2 inches
Length (top to bottom) at outside: 6 inches
Length (top to bottom) at inside: 4 1/2 inches

With the "top" being closest to the dash, and the bottom being closest to the e-brake.

Bear in mind the "top" and "bottom" are not of equal widths as the ring is tapered. If you've seen pictures, you know what I'm talking about.

BAC5.2 · Post by **BAC5.2** » Mon Feb 16, 2004 6:13 am

Awesome! Thank's Art!

I'll measure the stock stuff when I get home, unless someone beats me to it. I think the only real issue COULD be the inside dimensions in terms of stock mounting.

If it clears everything, I'll stop by the Subaru dealership and do the install.

I'll also do a write up with photos if anyone is interested in it.

Yukonart · Post by **Yukonart** » Mon Feb 16, 2004 6:18 am

No problemo!

Yeah. . . if you can, just go for the replica ring. It's still metal, just not the REAL thing. . . . costs a bit less, too.

BAC5.2 · Post by **BAC5.2** » Mon Feb 16, 2004 6:49 am

Yukonart wrote:No problemo!

Yeah. . . if you can, just go for the replica ring. It's still metal, just not the REAL thing. . . . costs a bit less, too.

Do you have an idea on the price of the "real ring"?

I don't mind a replica ring. I just think the "STi" thing is cool.

I doubt I'll get the "real" STi shift boot. I'll probably just get the Momo one and an Raceair-leather knob. Run the whole setup.

Anyone have any resources on where I can get the Raceair-leather knob and leather boot?

I'd like to keep the price under 150 if I could. I'll probably do this at the same time as a short shifter.

Yukonart · Post by **Yukonart** » Mon Feb 16, 2004 7:07 am

I have TWO boots to choose from. One is brand new and the other is just about new. . .

One is the Performance boot, and the other is the Elegance boot (and I'll throw in the aluminum trim ring for that one, too

)

Your choice, $25 + shipping.

Oh yeah, they're both black.

BAC5.2 · Post by **BAC5.2** » Mon Feb 16, 2004 7:12 am

You've got PM...

Yukonart · Post by **Yukonart** » Mon Feb 16, 2004 7:18 am

Replied. . .

. . . and I goofed. It was the "Endurance" not the "Elegance"

BAC5.2 · Post by **BAC5.2** » Mon Feb 23, 2004 9:08 pm

Damnit, I completely blanked about this. Check PM Art.

Yukonart · Post by **Yukonart** » Tue Feb 24, 2004 3:27 am

BAC5.2 wrote:Damnit, I completely blanked about this. Check PM Art.

Done and done.

BAC5.2 · Post by **BAC5.2** » Tue Feb 24, 2004 4:19 am

Art = The Man! Pleasure doing business with you!

Wan't to give me your STi surround too

?

Yukonart · Post by **Yukonart** » Tue Feb 24, 2004 4:46 am

BAC5.2 wrote:Art = The Man! Pleasure doing business with you!

Wan't to give me your STi surround too ?

But. . . but. . . . I like my shiny pieces. . . .

BAC5.2 · Post by **BAC5.2** » Tue Feb 24, 2004 4:55 am

dagnabbit.

I'll probably snag one of those replica ones you showed me. Wait, I have almost no money, lol. I'll stick to the boot and try to find an all-leather Momo Raceair for cheap

Yukonart · Post by **Yukonart** » Wed Feb 25, 2004 6:02 am

Oh, BTW. . . shipped today via Priority Mail.

BAC5.2 · Post by **BAC5.2** » Wed Feb 25, 2004 6:33 am

Sweet! Got and ETA? Probably by friday.

Yukonart · Post by **Yukonart** » Wed Feb 25, 2004 6:37 am

BAC5.2 wrote:Sweet! Got and ETA? Probably by friday.

At the latest, yes.

BAC5.2 · Post by **BAC5.2** » Wed Feb 25, 2004 6:42 am

YESSSSSSSS!!!!!!!

Now I just need a Momo RaceAir All-leather knob to match and I'll be pimpin.

This thing is gonna look so good

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

STi Shifter trim?

STi Shifter trim?