My heater / AC sounds weird – help diagnose

Subaru-related topics that don't belong anywhere else...

Moderators: Helpinators, Moderators

Post Reply
drive
In Neutral
Posts: 24
Joined: Tue Oct 15, 2002 1:15 pm
Location: Cleveland
Contact:

My heater / AC sounds weird – help diagnose

Post by drive »

Ok I have a 91 legacy turbo (US) with 145K miles. Just this morning I started to hear a weird sound when the heater or ac is on. It’s almost like a something is flapping around. The flapping sound changes proportionally to the speed setting on the vent controls. If I put my hand under the passenger side glove box I can feel the vibration. Is this my vent system coming to the end? If so does anyone know the exact name of the part? Is it the same for all legacy (turbo and NA) 90-94?

Thanks
JD
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

You probably have a leave or twig caught in the blower motor.

Remove the glove box, there's two screws below it. Remove the metal bracket that it was bolted to. You should see the three bolts that hold the blower motor in the ventilation box. Remove those three bolts and the motor should slide out. There may be an additional metal bracket you'll have to remove to get the blower motor out.....but shouldn't be a big deal.

Once you get it out.....you'll probably see something in there. Clean it out and put back together.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 »

Hmm, that's funny... I sometimes have the reverse problem; I hear a flapping from the vicinity of the blower motor when the motor's off. If I turn the fan on, it goes away.
mikec
Third Gear
Posts: 893
Joined: Tue Jan 21, 2003 8:27 pm
Location: Toronto, Ontario
Contact:

Post by mikec »

I've been getting a vibration noise when the passenger window is down and the fan is on since I took the dash apart. I think its the routing of the cable that controls the hot / cold air vent.

Ah... the sounds of a Legacy. :)
"That shouldn't be a problem, since I do regularly visit the realm of subatmospheric manifold pressures." -- vrg3
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

vrg3 wrote:Hmm, that's funny... I sometimes have the reverse problem; I hear a flapping from the vicinity of the blower motor when the motor's off. If I turn the fan on, it goes away.
It's possible something is in there, or loose.....when the blower motor is off the flapper vent stays part way open.....
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
123c
Second Gear
Posts: 396
Joined: Sat Jan 04, 2003 1:44 am
Location: WASHINGTON STATE
Contact:

Post by 123c »

I hear a "ticking" noise when I have the system off, and it apears to to be coming from behind the instrument panel or climate control panel. When I have the fan on, I sometimes hear a "howling" the faster I go, and when I am at a dead stop I don't hear a noise unless the wind is blowing. I have also noticed more of a "clicking" noise when the fan is set at a lower setting, I now on my brothers 1990 Legacy, his isn't really as loud.

I have also noticed that when I have the fan on I can smell stuff from the engine compartment and the surrounding area more easily. Is there something missing or not there which would cause this, because again on my brothers car, he doesn't really have this problem...
[color=red][b]1993 Subaru BC Turbo Legacy (193k miles)
1971 VW Super Beetle
1989 Honda Elite 50
[/color][/b]
LaureltheQueen
Spelling Nazi
Spelling Nazi
Posts: 4644
Joined: Fri Aug 29, 2003 7:14 am
Location: Lynnwood, WA
Contact:

Post by LaureltheQueen »

my tape deck's ghetto. when i have it turned up really loud(crappy mp3 recording) the fuzzy sound in the back changes loudness and pitch according to my motor's rpms. :cool:
Yukonart
Cradle Robber
Cradle Robber
Posts: 2655
Joined: Wed Aug 13, 2003 10:45 am
Location: Bothell, WA
Contact:

Post by Yukonart »

That's just a bad ground to the deck. :P
LaureltheQueen
Spelling Nazi
Spelling Nazi
Posts: 4644
Joined: Fri Aug 29, 2003 7:14 am
Location: Lynnwood, WA
Contact:

Post by LaureltheQueen »

my whole car is grounded badly. touch it wrong and you'll get zapped. :shock:
Yukonart
Cradle Robber
Cradle Robber
Posts: 2655
Joined: Wed Aug 13, 2003 10:45 am
Location: Bothell, WA
Contact:

Post by Yukonart »

Sounds like fun. . . .mind if I try, sometime? :wink:
LaureltheQueen
Spelling Nazi
Spelling Nazi
Posts: 4644
Joined: Fri Aug 29, 2003 7:14 am
Location: Lynnwood, WA
Contact:

Post by LaureltheQueen »

kinky :?
legacy92ej22t
Knowledgeable
Knowledgeable
Posts: 5203
Joined: Thu Nov 07, 2002 3:59 am
Location: Cogan Station, PA

Post by legacy92ej22t »

vrg3 wrote:Hmm, that's funny... I sometimes have the reverse problem; I hear a flapping from the vicinity of the blower motor when the motor's off. If I turn the fan on, it goes away.
My friend has the same problem and the local scooby dealer says it's a bad resistor. If he makes it so none of the buttons are pushed in it goes away, try it.
I have the slight ticking noise when my fan is on the lowest setting. Not sure what causes that though.
-Matt

'92 SS 5mt. All go and no show. Sold :(
'94 Audi UrS4 Modded (new project)
'96 Outback 5mt.
'07 Legacy 2.5i SE

[quote="Redlined"]
Oh... and I hope the fucker get bunked with Gunter, arrested for raping Gorillas.[/quote]
ericS2the6
First Gear
Posts: 217
Joined: Sat Oct 19, 2002 5:36 am

Post by ericS2the6 »

yep i have the same ticking noise when the "off" button is pushed in. just gently push the off button and another button together simutaneously to cancel each button out. ticking disapears.
vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 »

legacy92ej22t - Yeah, I've read that the resistor could be at fault too. I actually got my hands on a "new" one off a later model Legacy that I'm gonna swap in to try.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
Tleg93
Fifth Gear
Posts: 2281
Joined: Sun Jun 22, 2003 2:52 am
Location: Williamsport, PA

Ticking

Post by Tleg93 »

Yeah, that's how I silence the problem, just make sure the OFF button is never pushed in (that's when the noise happens). In other words make sure the OFF button is never ON hehe. I was told from someone that it was a resistor pack. I can't seem to locate it to replace it. To be honest I haven't looked all that hard.
I've noticed a couple other things in regards to this. Almost every time this clicking noise occurs if I shut the car down completely for a couple secs., turn the key to ACC until you hear a relay click, once the relay is energized wait just a sec and then start the car. Sometimes this makes the sound disappear until you turn on the air and turn it off again. It's almost definitely an electrical problem of some kind. I've noticed that it happens in my car even when the vent is on and the fan set low. At that point it sounds like the fan is pulsating when the car is idiling but this is intermittent. I don't know if it's related but when the AC unit is on any setting and I'm driving sometimes I feel a quick dropout like the car just blinks off for a split second. If I set the unit as described above (OFF button not pressed) then I can get on it and it doesn't "stutter".
Sorry about the long post it's just been anoying me to death.
--Scott--

1991 - Rio Red SS
vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 »

Wow, I haven't looked through my symptoms so thoroughly...

The resistor pack is attached to the evaporator core, I believe. The part number for a new one is 72024AA000. They're kind of expensive though. I might try making my own from a few power resistors from a surplus house.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
Tleg93
Fifth Gear
Posts: 2281
Joined: Sun Jun 22, 2003 2:52 am
Location: Williamsport, PA

noise

Post by Tleg93 »

It's been going on for about a year now that how I started to notice all that stuff. I guess I always have other things to spend my money on. It's not something that is real critical so I just let it go. BTW the relay clicks on in the ON position not Acc. Sorry about the long post I guess I started blabbing a bit....
--Scott--

1991 - Rio Red SS
Tleg93
Fifth Gear
Posts: 2281
Joined: Sun Jun 22, 2003 2:52 am
Location: Williamsport, PA

noises

Post by Tleg93 »

Hey JD, if replacing the resistor pack works let me know.
--Scott--

1991 - Rio Red SS
Post Reply