body kits
Moderators: Helpinators, Moderators
body kits
Is there any one on this board that is aware of companies that make tasteful bodykits for the legacy sedan. I am having trouble finding one. I need a bumper that I could fit a large fmic. I want to get rid of the black and chrome and also a side skirt. thanks, kelley.
There really isn't anything out there. There may be some odds & ends floating around in Japan.....but between the shipping and cost of the parts.....I don't think it's worth it.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Second Gear
- Posts: 266
- Joined: Wed Oct 16, 2002 6:57 am
- Location: North Bend, Wa
I have seen a bc legacy with a fmic on stock bumper. it can be done with just a little cutting to the bumper beam and bumper. custom piping of course would have to be made up. I don't think you would be able to get rid of the black trim unless you got a new front and rear bumper. then you would have to have the side molding shaved. all that would cost a fortune. I would just try and search some japanese sites and see if they have anything.
92 Legacy Turbo \ 5MT \ Silver
I honestly don't know of any vendors that have anything. One of the manufacturers is hippo sleak or something like that......uumm....The japanese Hyper Rev mag. may have some info. I know some past issues had pics of certain kits. But I'm not sure if you can get them.
Dave may know.
Dave may know.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Fourth Gear
- Posts: 1220
- Joined: Mon Oct 21, 2002 9:53 pm
- Location: Ottawa, Ontario, Canada, Now Sioux Lookout
Very little exists for the 1st gen legacy. Supposedly things do exist in Japan, I have only seen an aftermarket front bumper lip fitted to a Japanese Turbo sedan. BUT, in Austrailia and Europe legacy turbo's (Liberty RS's in Austrailia) came with plastic side skirts and rear bumper lips stock from the factory (along with an improved front bumper that luckily we here in north America got too). Both can be purchased from Wreckers in both areas. I got quoted 80 Austrailian dollars for each side
skirt and 120 for the rear bumper lip. The rear bumper lips will bolt onto the bumper, whereas the side skirts will have to taped on or clip holes cut into the rocker panels on our US/Canadian Spec Legacys.
Hope this helps,
Mark
skirt and 120 for the rear bumper lip. The rear bumper lips will bolt onto the bumper, whereas the side skirts will have to taped on or clip holes cut into the rocker panels on our US/Canadian Spec Legacys.
Hope this helps,
Mark
no they do not fit. i ordered the rear lip it sorta fit but didnt look like it belonged. oh well, you can order over seas for a rs bumper........Jimkelley wrote:I have heard that 2nd generation (95-99) bumpers will fit. is there anbody that is aware of this and how well they bolt up. thanks, kelley
MY93BC Legacy Sonora Sand---> black plasti-dip?
MY93GC Impreza Amethyst--> Glacier/aspen/pd White
93BC"edm" 93GC 90BC R.I.P.
MY93GC Impreza Amethyst--> Glacier/aspen/pd White
93BC"edm" 93GC 90BC R.I.P.
-
- First Gear
- Posts: 148
- Joined: Wed Oct 16, 2002 10:50 pm
- Location: Hilliard, OH
-
- Fourth Gear
- Posts: 1220
- Joined: Mon Oct 21, 2002 9:53 pm
- Location: Ottawa, Ontario, Canada, Now Sioux Lookout
It was a while back but it was either:
http://www.subspare.co.nz
http://www.justsubaroo.co.nz
or
http://www.aableparts.co.nz
Hope this helps,
Mark
http://www.subspare.co.nz
http://www.justsubaroo.co.nz
or
http://www.aableparts.co.nz
Hope this helps,
Mark
1991 Turbo Sedan, Aspen White 5MT, Sold RIP
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
send me the pics, I'll host them so you can post them.....hey that rhymes
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
just have a look at www.aerotech.co.nz in the subaru bodykits area
-
- Knowledgeable
- Posts: 1312
- Joined: Wed Oct 16, 2002 10:44 pm
- Location: Northern Sonoma County
- Contact:
-
- Knowledgeable
- Posts: 1312
- Joined: Wed Oct 16, 2002 10:44 pm
- Location: Northern Sonoma County
- Contact:
-
- Knowledgeable
- Posts: 1312
- Joined: Wed Oct 16, 2002 10:44 pm
- Location: Northern Sonoma County
- Contact:
-
- In Neutral
- Posts: 7
- Joined: Sun Nov 02, 2003 8:42 pm
- Location: Maine
- Contact:
Now this is what i'm taking about will this fit on my 95 Legacy L 4 dr sadanvolt wrote:just have a look at www.aerotech.co.nz in the subaru bodykits area
I love it I could see my car painted all black with that body kit frank