"A forum for 89-94 BC-BF Legacy Owners and Fans" - Hmmm, I hope this is not off-topic as mine is a 95...
I have a 95 legacy LSi with ABS. The ABS modulator is leaking and will need to be replaced. I am fairly sure I will be able to replace this myself but am unsure how to bleed the air out of the new modulator. Is this something that can be done in a home shop or are specialty tools/equipment needed to bleed the modulator?
I think the ABS modulator/pump is the Nippon 2E model.
Thanks
-Deon
Bleeding ABS modulator
Moderators: Helpinators, Moderators
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
The dealership has a special electrical doo-dad (god I feel old) that they can hook up to it that will open all the solenoids in the unit.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS