Injector Flow Rate for turbos

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
douglas vincent
Knowledgeable
Knowledgeable
Posts: 3336
Joined: Sun Apr 27, 2003 5:50 am
Location: OR, Portland
Contact:
Contact douglas vincent

Injector Flow Rate for turbos

Post by douglas vincent »

What is the injector flow rate for the stock turbo injectors? I looked and looked but couldnt find anything but the flow rate of 270 cc for the NA injectors.

Thanks
Reddevil, Awaiting new heart, will it ever happen?
1990 wagon, EJ25 12.3 @ 116.5 FAST Family wagon getting new motor soon
1992 wagon, wifes daily, high compression
1992 Touring wagon, should I keep it?
Top
Legacy777
Site Admin
Site Admin
Posts: 27932
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Contact Legacy777

Post by Legacy777 »

I think like 340 cc/min is what I've read on here.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Top
kelley
Vendor
Vendor
Posts: 484
Joined: Thu Oct 17, 2002 3:02 am
Location: portland, oregon.

Post by kelley »

370cc/min.
Top
pisces_0
In Neutral
Posts: 13
Joined: Mon Nov 06, 2006 5:14 pm
Location: Proctor, MN

Post by pisces_0 »

kelley wrote:370cc/min.
Anyone know if this flow rate was tested and verified at the industry standard of 43.5 psi (3 bar) fuel pressure, or at the stock Subaru fuel pressure of 36.3 psi (2.5 bar)?
Top
legacy92ej22t
Knowledgeable
Knowledgeable
Posts: 5203
Joined: Thu Nov 07, 2002 3:59 am
Location: Cogan Station, PA

Post by legacy92ej22t »

kelley wrote:370cc/min.
+1


I think I remember someone having them tested and they came back on the money but I don't recall what pressure they ran them at......
-Matt

'92 SS 5mt. All go and no show. Sold :(
'94 Audi UrS4 Modded (new project)
'96 Outback 5mt.
'07 Legacy 2.5i SE

[quote="Redlined"]
Oh... and I hope the fucker get bunked with Gunter, arrested for raping Gorillas.[/quote]
Top
pisces_0
In Neutral
Posts: 13
Joined: Mon Nov 06, 2006 5:14 pm
Location: Proctor, MN

Post by pisces_0 »

legacy92ej22t wrote:
kelley wrote:370cc/min.
...but I don't recall what pressure they ran them at......
That's what I'm trying to get at, the pressure they were tested at. If the injectors were sent to a shop to have them cleaned and flowed they were probably at 43.5 psi, but I'd like some confirmation on that.
Top
Post Reply

Return to “Engine”