2.6 motor update

kelley · Post by **kelley** » Thu Jul 08, 2004 3:50 am

just thought I would update those that are interested in the 2.6 motor build. well it is being prerun on the engine dyno.
with a tdo4 at 10-12 psi with a very conservative tune it is makeing 350 hp and sipping on california 91 octane. as you all know the tdo4's limit is pretty much 300 hp. i am very imprerssed and can't wait to see what it will do at 40 psi with the turbo that I have for it and on ethanol.

georryan · Post by **georryan** » Thu Jul 08, 2004 4:25 am

HOLY SCHMACK!!

kastrix · Post by **kastrix** » Thu Jul 08, 2004 4:50 am

I'll take two!!! J/k i would be interested in seing moire about it tho

legacy92ej22t · Post by **legacy92ej22t** » Thu Jul 08, 2004 5:29 am

Sweet!

NICO · Post by **NICO** » Thu Jul 08, 2004 1:11 pm

thats nuts but does it go faster then your legacy?

THAWA · Post by **THAWA** » Thu Jul 08, 2004 2:53 pm

I thought this was his legacy

mTk · Post by **mTk** » Thu Jul 08, 2004 3:12 pm

It is for the legacy iirc, hard to tell if it's faster nico, it's on an engine dyno.

MK

douglas vincent · Post by **douglas vincent** » Thu Jul 08, 2004 3:25 pm

Kelly, are you in Portland? Whos dyno are you using?

kelley · Post by **kelley** » Thu Jul 08, 2004 5:50 pm

douglas, I am in tigard/hillsboro.
I am not using anyones dyno around here. my engine builder/supplier has an engine dyno. I am trying to scrape together the funds to get a dynapak.
nico , yes this motor will be much stronger than the ej22g.
it is estimated to make 900hp at 30 psi. so we'll see.

THAWA · Post by **THAWA** » Thu Jul 08, 2004 5:52 pm

What block are you using?

kelley · Post by **kelley** » Thu Jul 08, 2004 6:12 pm

the block is a 2.0 ltr (wrc) block.

THAWA · Post by **THAWA** » Thu Jul 08, 2004 6:15 pm

holy chamoise!

georryan · Post by **georryan** » Thu Jul 08, 2004 6:31 pm

Oh gee whiz I think <looks down> yep, just peed my pants.

That's crazy cool.

georryan · Post by **georryan** » Thu Jul 08, 2004 6:31 pm

On a side note, how is the wrc block different than any other block?

kelley · Post by **kelley** » Thu Jul 08, 2004 8:27 pm

georryan wrote:Oh gee whiz I think <looks down> yep, just peed my pants.

That's crazy cool.

well the cylinder walls are much stronger amongst other things (I can't remember right now)

BAC5.2 · Post by **BAC5.2** » Thu Jul 08, 2004 8:55 pm

When can we expect a Perfection Motorsports 2.4L Stroker kit for the EJ22t?

kelley · Post by **kelley** » Thu Jul 08, 2004 9:18 pm

that is somtething that will be on our website and will be stocked in the future. I just need to get some other projects out of the way before this will be done. there is so much to do and not enough time to do it all. I am also working on a turbo kit for the 600rr

if anyone is interested in a short block they can contact me and I can work up a quote. but no set prices and specific builds as of now.

THAWA · Post by **THAWA** » Fri Jul 09, 2004 4:45 am

more importantly when can we expect a perfection motorsports 2.6l kit for the ej22t?

azn2nr · Post by **azn2nr** » Fri Jul 09, 2004 6:35 am

are you going to be doing anything for the H6 3.0

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

2.6 motor update

2.6 motor update