Adding A/C to a car that doesnt have it..
Moderators: Helpinators, Moderators
Adding A/C to a car that doesnt have it..
I just bought a 1991 sub legacy wagon L with busted tranny for parts, I was wondering if its possible to take the air conditioning and add it to my car that doesnt have it.
any tips on how i should go about to do it if possible?
Thanks
Pat
any tips on how i should go about to do it if possible?
Thanks
Pat
1990 FWD Legacy Wagon Base
Would that car have some parts that you don't need? I'm looking for a passenger sun visor and the antenna portion of the power antenna (just the part that extends and retracts). Can you message me if they're available?
(Yes, I'm a bit of a vulture, but I don't want to pay for new parts).
Regarding your original post, I don't know for sure, but I would guess that its pretty difficult. I imagine there's quite a bit to the system.
(Yes, I'm a bit of a vulture, but I don't want to pay for new parts).
Regarding your original post, I don't know for sure, but I would guess that its pretty difficult. I imagine there's quite a bit to the system.
"That shouldn't be a problem, since I do regularly visit the realm of subatmospheric manifold pressures." -- vrg3
Is the L you bought have ABS or not? If not.....can you look on the master cylinder and see what the size is.....it should have a 1 or 1 1/16
If it has the 1 1/16 one.....can I buy it off ya?
If it has the 1 1/16 one.....can I buy it off ya?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- quasi-mod-o
- Posts: 6000
- Joined: Thu Dec 05, 2002 7:06 pm
- Location: Tampa, FL
Hahaha, everyone should know by now that you don't ever mention the words "PARTS CAR" on this forum...
That said, a front bumper and right headlight would be nice
That said, a front bumper and right headlight would be nice
2000 Subaru Legacy B4 RSK
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
*Formerly DerFahrer*
@entirelyturbo on social media, including Facebook, Instagram, Twitter, and TikTok
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
*Formerly DerFahrer*
@entirelyturbo on social media, including Facebook, Instagram, Twitter, and TikTok
There will be a number on it, like in the pic.paf wrote:how do I go about measuring the master cylinder?
http://www.main.experiencetherave.com:8 ... p_1808.jpg
Last edited by Legacy777 on Thu Aug 21, 2003 4:36 am, edited 1 time in total.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
i need another one of these too.....since mine was demolished....ciper wrote:Id like the front left side marker.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
You could put the a/c in but it is going to take some work. All of the mechanical parts need to be in good order. If you can start the car turn the a/c on and see if it blows cold air. once all the mechanical parts are in your probably going to need and additional fan, you can probably pull it off the parts car. The fans I'm refering to are the fans that draw air through the front of the car. On the electrical side your going to need to tell the car that the A/C compressor is on so it can bump the idle. Your going to need to swap out the switch you have inside the car, and figure out how to wire it up to your existing harness. Japanese are famous for pre wiring their cars for everything so you may luck out and not have to re-wire anything. Needless to say its a big undertaking, but good luck I hope it works out. oh yeah I don't need anything parts wise
We have two seasons in Miami, Hot and Hotter!
Thanks Fernely for the info... I Might6 actually do it but it is not a priority right now as I have to patch up a few holes, change struts etc to get it to pass MVI
Sorry josh, Its marked 1
as for the corner lamps
I am replacing some and keeping the rest as I will probably end up needing them
I will think about the headlights
Sorry josh, Its marked 1
as for the corner lamps
I am replacing some and keeping the rest as I will probably end up needing them
I will think about the headlights
1990 FWD Legacy Wagon Base
thanks paf
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Other thing I'm looking for is the clips for the center console lid. One of mine broke or just being weird.
I know you can unscrew the lid portion pretty easily, but not sure if the hinges come off that easily.
I know you can unscrew the lid portion pretty easily, but not sure if the hinges come off that easily.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm