My car is done!!!

jake15 · Post by **jake15** » Thu Sep 16, 2004 5:44 am

aside from a few problems (no spark) the car is done. its been a long, long road but its definetley worth it. i've only driven it a little but it seems to pull harder. cant wait to mod it more

well pic time.

this is my WRX coolant tank, i need to make a metal bracket for it, right now its held on by zip ties

this is the reason i cant run recirc, so i'm hoping to pick up a turboxs type h rfl soon

this was my fix for the turbo-throttle body hose. so far it works great.

i had to plug the vaccum line for the bypass valve (now blow off valve) so it wouldnt stay open at idle. but this bov wil be replaced before i drive the car anymore.

Yukonart · Post by **Yukonart** » Thu Sep 16, 2004 5:49 am

Looks great, Jake! Do you have any plans to dyno once you're done with the power mods?

jake15 · Post by **jake15** » Thu Sep 16, 2004 5:52 am

of course. lol. but that wont be for a while yet....

turbonator · Post by **turbonator** » Fri Sep 17, 2004 3:35 am

Nice stuff..

Did you remove the hood pading? Is it just there for sound?

jake15 · Post by **jake15** » Fri Sep 17, 2004 3:49 am

i did remove the hood padding.... it was just really annoying, and i'm sure it serves a purpose but i dont really care what it is

LaureltheQueen · Post by **LaureltheQueen** » Fri Sep 17, 2004 4:02 am

keeps your ass from catching on fire if you sit on the hood with the engine running

car looks mega clean

vrg3 · Post by **vrg3** » Fri Sep 17, 2004 4:14 am

It's also supposed to smother engine fires -- it's meant to fall down from the hood when exposed to a flame.

And it's supposed to keep the engine bay warm when you park so that there's a better chance of the engine still being warm by the time you start the car again.

Mine fell apart a while ago... a replacement is like a hundred bucks, which isn't too bad, but I haven't replaced it yet. I've definitely noticed the engine cooling down faster since it's been missing.

scottzg · Post by **scottzg** » Fri Sep 17, 2004 6:18 am

probably protects the paint too. Why not gank a JY one vrg?

BAC5.2 · Post by **BAC5.2** » Fri Sep 17, 2004 6:24 am

Scott is right too.

Ever see cars with the clearcoat peeling off the hood? Most likely, they had a cooling problem, the engine ran HOT, and they didn't have a hood pad.

I've got one in the 94, I didn't have one in the 95

dzx · Post by **dzx** » Fri Sep 17, 2004 7:17 am

Looks very nice

legacy92ej22t · Post by **legacy92ej22t** » Fri Sep 17, 2004 1:42 pm

Nice Jake! Very clean and pretty.

vrg3 · Post by **vrg3** » Fri Sep 17, 2004 2:31 pm

The turbo and non-turbo blankets are different, since the turbo one has to have a hole for the scoop... it might be possible to cut it open, but I don't know; there may be some kind of engineering that goes into its shape.

It's also very hard to remove one without damaging it, even if you're lucky enough to find one intact in a junkyard.

$100 seems to me like it's worth it for the protection and fit of a new blanket... I just have to save up.

Jake - I think you should try to find or make an adapter that bolts onto the BOV flange and has a 3/4" hose fitting. It looks like if you use a 3/4" elbow you could have it point towards the passenger side of the car and have the hose go over the throttle body.

LaureltheQueen · Post by **LaureltheQueen** » Sun Sep 19, 2004 4:35 pm

i can check on my prices for one, and ship it over to you if you're interested

vrg3 · Post by **vrg3** » Sun Sep 19, 2004 5:07 pm

Thanks, Laurel; I'd appreciate that. The shipping zip code would be 14850.

entirelyturbo · Post by **entirelyturbo** » Mon Sep 20, 2004 3:50 am

Very nice Jake!

I'm sorry if I missed the discussion elsewhere, but let me see if I got this right: This is a 90 Legacy that became a Legacy Turbo through the addition of a turbo front bumper, hood, and spoiler, and of course an EJ22T

, then had a TD05 installed, with what I believe to be a USDM WRX IC??

Two thumbs up! Very impressive!

vrg3 · Post by **vrg3** » Mon Sep 20, 2004 3:54 am

Can you give more details on how you mounted the WRX coolant filler tank? Do you think it'd fit there on an ABS car?

legacy92ej22t · Post by **legacy92ej22t** » Mon Sep 20, 2004 4:04 am

I think he has ABS Vikash. Look in this picture by the hood prop and you'll see the ABS unit.

vrg3 · Post by **vrg3** » Mon Sep 20, 2004 4:22 am

Oh, huh... I guess I was just not looking closely. It just looks like there's a lot more space in that part of the engine bay than in my car.

jake15 · Post by **jake15** » Mon Sep 20, 2004 5:30 am

yup, the car has everything but a sunroof. went from a 90 std fwd legacy to a 91 turbo awd w/o a sunroof. the coolant tank is just wedged+zip tied in there until i can scrounge up some metal to make a bracket, but yes there is enought room, and there would be more room with a aftermarket air filter. it still has a problem ,brakes, but hopefully that will be worked out and i will be driving it by the middle of october

thanks for all of your comments guys.

QuickDrive · Post by **QuickDrive** » Mon Sep 20, 2004 5:41 am

My engine bay has the purge canister in the location where that tank is...

I'll deffinately be changing out my coolant tank to a wrx one due to the brass fittings that are on my tank.

jake15 · Post by **jake15** » Mon Sep 20, 2004 6:09 am

the purge tank is still there... just in front of the coolant tank, if you look in one of the pictures you can see the lines coming from it.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

My car is done!!!

My car is done!!!