boost to = N/A HP levels?

greg donovan · Post by **greg donovan** » Wed Nov 03, 2004 7:46 am

ok, off boost a ej22t is a just low CR motor. what boost level will equal the hp levels of a ej22?

2 psi?

also if the HP is equal w/the torque be higher?

douglas vincent · Post by **douglas vincent** » Wed Nov 03, 2004 7:52 am

I go by that every psi = .07% of stock hp. Low compression engines result in lower percent and higher compression engines result in a higher percentage obviously, but .07 is a good average.

boostjunkie · Post by **boostjunkie** » Wed Nov 03, 2004 6:10 pm

Depends on the type of turbo and intercooler (if used) that are supplying the boost.

greg donovan · Post by **greg donovan** » Thu Nov 04, 2004 6:39 am

totaly stock ej22t.

curious what boost level would yield 135 hp on a ej22t?

douglas vincent · Post by **douglas vincent** » Thu Nov 04, 2004 7:58 am

crank or wheel?

greg donovan · Post by **greg donovan** » Thu Nov 04, 2004 1:26 pm

douglas vincent · Post by **douglas vincent** » Thu Nov 04, 2004 5:22 pm

stock 160 bhp = about 128 crank so add another psi for 135 chp?

greg donovan · Post by **greg donovan** » Thu Nov 04, 2004 5:46 pm

i thought a stock ej22t made 165 CHP.

TurboLegacy · Post by **TurboLegacy** » Thu Nov 04, 2004 9:43 pm

thats the ej25 like in the foreter , baja, impreza 2.5rs, and some legacys

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

boost to = N/A HP levels?

boost to = N/A HP levels?