i am about to put some 17" rims on and am wondering if 17 x 45 x 225 will fit??  Anyone running them???
         Thanks 
         Gordini
			
			
									
						
										
						anyone have 225s
Moderators: Helpinators, Moderators
- 
				rsstiboy
 - Second Gear
 - Posts: 428
 - Joined: Sun Apr 20, 2003 3:45 am
 - Location: Brisbane, Australia
 - Contact:
 
std suspension it will scrub, go for 215/45/17 you will have no problems then unless you throw it into a corner REALLY hard, it also depends on the wheel offset.
			
			
									
						
							MY02 B4 Liberty, 2 1/2" off the primary with splitter, 3" off the secondary, 3" the rest of the way, completely stainless, k&n filter, ECUtek 3, 500HP walbro, 173kw@all4
			
						I'm kinda confused...17x7 w/ 53off w/ 225/45/17 doesn't rub with a 1.5 to 2.5 drop, ditto 17x7.5 48off w/ 225/45/17, yet std suspension will rarely rub with 17x7 215/45/17?  Oh yeah, doesn't say offset on that one.  Mmmm.  Cause I would really really like to run either 17x7 or 17x7.5 with 225/45(or40)/17's with the stock suspension, and eventually, with a set of whiteline control's 25-40mm drop.  Anyknow know how or if I can do this?  and what offset I would need to look for to do it?
Mucho Thankos
Micum
			
			
									
						
							Mucho Thankos
Micum
Micum 
91 Legacy Turbo Sport - 94 JDM EJ20G
97 Legacy 2.5 GT - mod'd
93 Impreza L AWD (sold)
97 Legacy 2.5 GT (deceased)
98 Legacy Outback (sold)
			
						91 Legacy Turbo Sport - 94 JDM EJ20G
97 Legacy 2.5 GT - mod'd
93 Impreza L AWD (sold)
97 Legacy 2.5 GT (deceased)
98 Legacy Outback (sold)
- 
				rsstiboy
 - Second Gear
 - Posts: 428
 - Joined: Sun Apr 20, 2003 3:45 am
 - Location: Brisbane, Australia
 - Contact:
 
my wheels are non subaru ones, they are avanti viperA2 wheels i have had them for a while , from memory they are 17 X 7 but if you can find out the offset for these let me know  
 there is a pic of my wheels in the picture gallery section of this site, go to australia rs cruise.
			
			
									
						
							MY02 B4 Liberty, 2 1/2" off the primary with splitter, 3" off the secondary, 3" the rest of the way, completely stainless, k&n filter, ECUtek 3, 500HP walbro, 173kw@all4
			
						
				