Page 6 of 131
Posted: Fri Jan 22, 2010 7:40 pm
by ericem
Legacy777 wrote:Eric, you car is puking it's motor and trans out...

lol stupid thing made a nice oily mess all over my driveway!

Posted: Sat Jan 23, 2010 6:01 am
by Apex3
I'm always late with this, but I've been doin work lately. Got my coffee cup mod made yesterday, $15

I like the sound, hopefully people outside the car can here it now, I like surprising people.
Once I get it cleaned up a bit and painted I'll post pics to show you all how it should be done, there are some pretty sketchy ones out there. Honestly I haven't seen a single one that looks like it belongs in the engine.
Posted: Sat Jan 23, 2010 7:09 am
by douglas vincent
Reinstalled the AVCR in conjunction with the Greddy TRUST MBC. Will see if it can cause boost to build a bit faster.....
Installing Greddy boost guage and EGT gauges as well. The Harbor Freight boost guage works awesome, only it stops numerically at 20 psi.

Posted: Thu Jan 28, 2010 4:08 am
by SubiePrice88
Not so much what I did to it...but what I did for it.... drove 600 miles for two silver fenders! Will have those on this weekend!
Posted: Thu Jan 28, 2010 8:48 am
by cartwheels
Ebay strut bars and new front axles... tomorrow I'm getting a catless exhaust from a WRX modified and put on, as well as changing the diff oil.
And of course a track day on Saturday

Posted: Thu Jan 28, 2010 9:18 am
by kimokalihi
SubiePrice88 wrote:Not so much what I did to it...but what I did for it.... drove 600 miles for two silver fenders! Will have those on this weekend!
Holy shit. One way? That's something I wouldn't do.
Posted: Thu Jan 28, 2010 4:51 pm
by Lunatech
kimokalihi wrote:SubiePrice88 wrote:Not so much what I did to it...but what I did for it.... drove 600 miles for two silver fenders! Will have those on this weekend!
Holy shit. One way? That's something I wouldn't do.
Eh. Just a drop in the bucket.
Posted: Thu Jan 28, 2010 6:01 pm
by evolutionmovement
I drove about 1700 miles (roundtrip to Detroit) to look at a turbo Legacy I didn't buy.
Posted: Thu Jan 28, 2010 7:53 pm
by SLODRIVE
Right now I'm reassembling the mainshaft from the STi's 6MT. Good times!
Posted: Thu Jan 28, 2010 9:54 pm
by Mattheww044
kimokalihi wrote:SubiePrice88 wrote:Not so much what I did to it...but what I did for it.... drove 600 miles for two silver fenders! Will have those on this weekend!
Holy shit. One way? That's something I wouldn't do.
no we just drove to Snoqualmie, picked up the fenders, and drove around Seattle quite a bit, but the whole point of the trip was to get the fenders.
Today, I am about to turn my boost down

Posted: Fri Jan 29, 2010 4:14 am
by SubiePrice88
kimokalihi wrote:SubiePrice88 wrote:Not so much what I did to it...but what I did for it.... drove 600 miles for two silver fenders! Will have those on this weekend!
Holy shit. One way? That's something I wouldn't do.
haha no, round trip...$120 in gas plus $50 for both fenders... expensive yes...fun yes. Plus it was nice getting out of spokane.

Posted: Mon Feb 01, 2010 5:56 pm
by SLODRIVE
I'm a few hours late posting this up...but got the 6MT all together, and then made a BPV adapter and trimmed the T/B opening on a WRX TMIC.
Posted: Tue Feb 02, 2010 4:16 am
by BSOD2600
Installed a[nother] new knock sensor. Wired it back to the ECU with microphone wire. *crosses fingers it fixes the issues*
Posted: Wed Feb 03, 2010 5:38 am
by brweber352
BSOD2600 wrote:Installed a[nother] new knock sensor. Wired it back to the ECU with microphone wire. *crosses fingers it fixes the issues*
Dude, I pray to God this fixes your car. I feel so bad that you've been battling this thing so long, I've been keeping up at revtronix.com.
Today I checked all my fluids and tire pressure, my damn hood will not stay shut

. Sometimes I just stare under the hood and imagine what could be, seriously!
Posted: Wed Feb 03, 2010 5:55 am
by douglas vincent
evolutionmovement wrote:I drove about 1700 miles (roundtrip to Detroit) to look at a turbo Legacy I didn't buy.
We all know that was a cover for a hit.....
Posted: Thu Feb 04, 2010 3:41 am
by SubiePrice88
SubiePrice88 wrote:kimokalihi wrote:SubiePrice88 wrote:Not so much what I did to it...but what I did for it.... drove 600 miles for two silver fenders! Will have those on this weekend!
Holy shit. One way? That's something I wouldn't do.
haha no, round trip...$120 in gas plus $50 for both fenders... expensive yes...fun yes. Plus it was nice getting out of spokane.

Swapped fenders, cleared head lights (so much better), put on summer wheels, painted hood black (carbon fiber yo...not really)
Well....they dont completly match...and I didnt pay much attention to the paint code. BUT it looks alot better than the Blue front end it had and it was worth the road trip atleast

Posted: Mon Feb 08, 2010 7:51 am
by Smithcraft
This week I replaced a defective throttle position sensor, and changed the plugs.
SC
Posted: Fri Feb 12, 2010 5:34 am
by jeffast
I started converting my impreza from fwd auto to awd 5spdd i replaced the engine and transmission today
Posted: Fri Feb 12, 2010 7:46 am
by kleinkid
Rebuilt the right front caliper using half the parts in seal kit 26297AA021. Someday, I'm sure that the left front will get rebuilt with the rest of the parts.
Posted: Fri Feb 12, 2010 7:53 am
by bmxkelowna
fired up my dohc and td05 swap
Posted: Wed Feb 17, 2010 8:12 am
by jeffast
jeffast wrote:I started converting my impreza from fwd auto to awd 5spdd i replaced the engine and transmission today
finished the conversion today god this thing pulls good with that new engine

Posted: Wed Feb 17, 2010 8:45 pm
by Mattheww044
haha nice to hear, probably alot more fun too
Posted: Mon Feb 22, 2010 3:09 am
by Smithcraft
Wasn't intending to do much, but while I was unloading some groceries, I noticed some leaves and assorted debris down in the bottom of the fender area behind the mudflaps and went to remove it.
Half an hour later I had a couple of cubic inches of dirt piled up on the ground on both sides of the car...
Once the hose gets hooked back up, I'm gonna have to remember to wash those areas out.
SC
Posted: Mon Feb 22, 2010 3:57 am
by 206er
i did that coffee mug mod everyone always talks about but i dont know if its gonna work or not

Posted: Mon Feb 22, 2010 5:14 am
by SubiePrice88
^ BAHAHA! Make that work! Thats awesome looking!
