Page 3 of 3
Re: turbo wagon help
Posted: Sun Nov 24, 2013 5:25 pm
by cj91legss
There's no write up. But it's quite simple.
Disconnect the maf, Un tighten the 3 phillips screws on the maf housing, pull sensor out of maf housing, and spray with MAF Sensor cleaner per instructions on the back of the can (You can get this at Schucks, autozone, any other similar parts store.) And re install maf.
Re: turbo wagon help
Posted: Mon Nov 25, 2013 3:11 am
by ugaucin
Any pictures where it is at? No idea what it is. Sorry I'm a noob.
Re: turbo wagon help
Posted: Mon Nov 25, 2013 3:30 am
by cj91legss
Silver housing bolted to the airbox...
Re: turbo wagon help
Posted: Mon Nov 25, 2013 8:33 am
by ugaucin
Alright thanks. Gotta gRt to fixing these things. Need to pass to plate it.
Re: turbo wagon help
Posted: Mon Nov 25, 2013 8:12 pm
by ugaucin
I tested the maf by unplugging it when the car was on and it died. Doesnt that mean its working right?
Re: turbo wagon help
Posted: Mon Nov 25, 2013 10:36 pm
by ugaucin
im guessing this is enough to run rich.
Re: turbo wagon help
Posted: Thu Nov 28, 2013 4:19 am
by robertpaige
Definitely ain't helping. Fix that!
Re: turbo wagon help
Posted: Thu Nov 28, 2013 4:36 am
by cj91legss
Seriously ^^^ that hose goes to the pcv valve and the vent on the top of the block. That may be your problem.
Re: turbo wagon help
Posted: Thu Nov 28, 2013 8:14 am
by ugaucin
Id like to thank the previous owners my wagon for all the problems lol. Sorry for the stupid questions. Thanks guys