whining from engine

limonoah · Post by **limonoah** » Thu May 02, 2002 5:39 pm

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

frmrgz2rchz · Post by **frmrgz2rchz** » Thu May 02, 2002 10:21 pm

--- In BC-BFLegacyWorks@y..., "limonoah" <limonoah@h...> wrote:
> I'm trying to find what's causing a whining noise coming from my
> engine (EJ20G). Its gets worse as the car warms up, and increases
in
> volume with higher RPMS....
Well, I've heard of it, but I'm not positive of the solution. If
it's the same kind of whine mine was, I believe it is a transmission
problem, rather than an engine problem. Does the whine occur while
the car is in neutral? If not, I would get the tranny checked out.
I'm not sure if this is the problem, but I won't know if that is
what was wrong with my car. My engine bearings wore out a couple
weeks ago, and I am going to drop in a turbo engine. Tranny is
going to be changed as well.

------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Doug Hancock · Post by **Doug Hancock** » Mon May 06, 2002 6:59 am

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Kam · Post by **Kam** » Mon May 06, 2002 7:59 am

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!

----- Original Message -----
From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2021092.34 ... ?code=3466> Click Here!
<http://us.adserver.yahoo.com/l?M=194081 ... =416368156>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Doug Hancock · Post by **Doug Hancock** » Mon May 06, 2002 7:59 am

Yeh I’ve owned my RS for about 5 weeks and the cluth is dead. Just fries at high RPM. Learnt my leason but hay it puts you in your fn seat.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 9:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

ADVERTISEMENT
<http://rd.yahoo.com/M=226014.2032696.35 ... 000239/R=1>
<http://us.adserver.yahoo.com/l?M=226014 ... =287688023>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Kam · Post by **Kam** » Mon May 06, 2002 8:09 am

Doug, I'm starting to get the occasional slip at beyond 3500 rpm. Looks like time to start shopping around for a new beefy clutch! Had mine for 6 months - guy before me was a mech and he installed new clutch not that long ago but definitely a cheapo job cos I still got the receipt! Need one good for 300 horses cos I need to chase after Dave's 274bhp mint baby!! (probably wont even get anywhere near that tho!)
----- Original Message -----
From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 12:57 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Yeh I’ve owned my RS for about 5 weeks and the cluth is dead. Just fries at high RPM. Learnt my leason but hay it puts you in your fn seat.

-----Original Message-----
From: Kam [ mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 9:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

ADVERTISEMENT
<http://rd.yahoo.com/M=226014.2032696.35 ... 000239/R=1>
<http://us.adserver.yahoo.com/l?M=226014 ... =622783079>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Doug Hancock · Post by **Doug Hancock** » Mon May 06, 2002 9:54 am

Where you from Kam. Got any suggestions about a cluch. I was thinking of a ceramic item but I don’t really know about cluches that much. Ie what forces etc.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 108 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Doug, I'm starting to get the occasional slip at beyond 3500 rpm. Looks like time to start shopping around for a new beefy clutch! Had mine for 6 months - guy before me was a mech and he installed new clutch not that long ago but definitely a cheapo job cos I still got the receipt! Need one good for 300 horses cos I need to chase after Dave's 274bhp mint baby!! (probably wont even get anywhere near that tho!)
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 12:57 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Yeh I’ve owned my RS for about 5 weeks and the cluth is dead. Just fries at high RPM. Learnt my leason but hay it puts you in your fn seat.

-----Original Message-----
From: Kam [ mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 9:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

ADVERTISEMENT
<http://rd.yahoo.com/M=217097.2003762.34 ... ge=account>
<http://us.adserver.yahoo.com/l?M=217097 ... =494030839>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Kam · Post by **Kam** » Mon May 06, 2002 12:09 pm

UK - I haven't really looked around too much but I do know that they are about 300 - 400 british pounds - AP do one for 400 notes!
----- Original Message -----
From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 2:36 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Where you from Kam. Got any suggestions about a cluch. I was thinking of a ceramic item but I don’t really know about cluches that much. Ie what forces etc.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 108 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Doug, I'm starting to get the occasional slip at beyond 3500 rpm. Looks like time to start shopping around for a new beefy clutch! Had mine for 6 months - guy before me was a mech and he installed new clutch not that long ago but definitely a cheapo job cos I still got the receipt! Need one good for 300 horses cos I need to chase after Dave's 274bhp mint baby!! (probably wont even get anywhere near that tho!)
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 12:57 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Yeh I’ve owned my RS for about 5 weeks and the cluth is dead. Just fries at high RPM. Learnt my leason but hay it puts you in your fn seat.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 9:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2021092.34 ... ?code=3466> Click Here!
<http://us.adserver.yahoo.com/l?M=194081 ... =441224046>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

dfullerton · Post by **dfullerton** » Mon May 06, 2002 4:39 pm

Hi Kam just to let you know im getting some clutch judder now and i too am thinking of getting a new one ,but what really bothers me is second gear sincro going as that change from firts to second is A REAL PAIN, still looking for a good mapper for my unichip
----- Original Message -----
From: Kam <mailto:kam@subarunutter.com>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 4:41 PM
Subject: Re: [BC-BFLegacyWorks] whining from engine

UK - I haven't really looked around too much but I do know that they are about 300 - 400 british pounds - AP do one for 400 notes!
----- Original Message -----
From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 2:36 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Where you from Kam. Got any suggestions about a cluch. I was thinking of a ceramic item but I don’t really know about cluches that much. Ie what forces etc.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 108 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Doug, I'm starting to get the occasional slip at beyond 3500 rpm. Looks like time to start shopping around for a new beefy clutch! Had mine for 6 months - guy before me was a mech and he installed new clutch not that long ago but definitely a cheapo job cos I still got the receipt! Need one good for 300 horses cos I need to chase after Dave's 274bhp mint baby!! (probably wont even get anywhere near that tho!)
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 12:57 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Yeh I’ve owned my RS for about 5 weeks and the cluth is dead. Just fries at high RPM. Learnt my leason but hay it puts you in your fn seat.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 9:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

ADVERTISEMENT
<http://rd.yahoo.com/M=226014.2032696.35 ... 000239/R=1>
<http://us.adserver.yahoo.com/l?M=226014 ... =374960771>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Kam · Post by **Kam** » Mon May 06, 2002 5:49 pm

Dave, I've been mega bogged under at work. Was going to do some work on my this bank hol but been in office everyday. Speak soon.
----- Original Message -----
From: dfullerton <mailto:dfullerton@dfullerton.screaming.net>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 9:19 PM
Subject: Re: [BC-BFLegacyWorks] whining from engine

Hi Kam just to let you know im getting some clutch judder now and i too am thinking of getting a new one ,but what really bothers me is second gear sincro going as that change from firts to second is A REAL PAIN, still looking for a good mapper for my unichip
----- Original Message -----
From: Kam <mailto:kam@subarunutter.com>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 4:41 PM
Subject: Re: [BC-BFLegacyWorks] whining from engine

UK - I haven't really looked around too much but I do know that they are about 300 - 400 british pounds - AP do one for 400 notes!
----- Original Message -----
From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 2:36 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Where you from Kam. Got any suggestions about a cluch. I was thinking of a ceramic item but I don’t really know about cluches that much. Ie what forces etc.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 108 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Doug, I'm starting to get the occasional slip at beyond 3500 rpm. Looks like time to start shopping around for a new beefy clutch! Had mine for 6 months - guy before me was a mech and he installed new clutch not that long ago but definitely a cheapo job cos I still got the receipt! Need one good for 300 horses cos I need to chase after Dave's 274bhp mint baby!! (probably wont even get anywhere near that tho!)
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 12:57 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Yeh I’ve owned my RS for about 5 weeks and the cluth is dead. Just fries at high RPM. Learnt my leason but hay it puts you in your fn seat.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 9:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

ADVERTISEMENT
<http://rd.yahoo.com/M=226014.2032696.35 ... 000239/R=1>
<http://us.adserver.yahoo.com/l?M=226014 ... =202766196>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Doug Hancock · Post by **Doug Hancock** » Tue May 07, 2002 7:29 am

Around $1000 Australian for the genuine article. It is a rip off and there are better out there for around the 600 mark. But I still have to look into it. I live in Newcastle Australia. Looks like we got the gun versions of thee Liberty ( Legacy ).

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Tuesday, 7 May 2002 1:42 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

UK - I haven't really looked around too much but I do know that they are about 300 - 400 british pounds - AP do one for 400 notes!
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 2:36 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Where you from Kam. Got any suggestions about a cluch. I was thinking of a ceramic item but I don’t really know about cluches that much. Ie what forces etc.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 108 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Doug, I'm starting to get the occasional slip at beyond 3500 rpm. Looks like time to start shopping around for a new beefy clutch! Had mine for 6 months - guy before me was a mech and he installed new clutch not that long ago but definitely a cheapo job cos I still got the receipt! Need one good for 300 horses cos I need to chase after Dave's 274bhp mint baby!! (probably wont even get anywhere near that tho!)
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 12:57 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Yeh I’ve owned my RS for about 5 weeks and the cluth is dead. Just fries at high RPM. Learnt my leason but hay it puts you in your fn seat.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 9:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

ADVERTISEMENT
<http://rd.yahoo.com/M=226014.2032696.35 ... 000239/R=1>
<http://us.adserver.yahoo.com/l?M=226014 ... =642279488>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Kam · Post by **Kam** » Tue May 07, 2002 9:19 am

Looks like I might get one shipped from Oz then

)
----- Original Message -----
From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Tuesday, May 07, 2002 127 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Around $1000 Australian for the genuine article. It is a rip off and there are better out there for around the 600 mark. But I still have to look into it. I live in Newcastle Australia. Looks like we got the gun versions of thee Liberty ( Legacy ).

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Tuesday, 7 May 2002 1:42 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

UK - I haven't really looked around too much but I do know that they are about 300 - 400 british pounds - AP do one for 400 notes!
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 2:36 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Where you from Kam. Got any suggestions about a cluch. I was thinking of a ceramic item but I don’t really know about cluches that much. Ie what forces etc.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 108 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Doug, I'm starting to get the occasional slip at beyond 3500 rpm. Looks like time to start shopping around for a new beefy clutch! Had mine for 6 months - guy before me was a mech and he installed new clutch not that long ago but definitely a cheapo job cos I still got the receipt! Need one good for 300 horses cos I need to chase after Dave's 274bhp mint baby!! (probably wont even get anywhere near that tho!)
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 12:57 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Yeh I’ve owned my RS for about 5 weeks and the cluth is dead. Just fries at high RPM. Learnt my leason but hay it puts you in your fn seat.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 9:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!
----- Original Message -----

From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

ADVERTISEMENT
<http://rd.yahoo.com/M=226014.2032696.35 ... 000239/R=1>
<http://us.adserver.yahoo.com/l?M=226014 ... =757321094>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Doug Hancock · Post by **Doug Hancock** » Wed May 08, 2002 4:09 am

I think that is the price. Other people feel free to jump in and tell me if im wrong.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Tuesday, 7 May 2002 107 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Looks like I might get one shipped from Oz then

)
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Tuesday, May 07, 2002 127 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Around $1000 Australian for the genuine article. It is a rip off and there are better out there for around the 600 mark. But I still have to look into it. I live in Newcastle Australia. Looks like we got the gun versions of thee Liberty ( Legacy ).

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Tuesday, 7 May 2002 1:42 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

UK - I haven't really looked around too much but I do know that they are about 300 - 400 british pounds - AP do one for 400 notes!
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 2:36 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Where you from Kam. Got any suggestions about a cluch. I was thinking of a ceramic item but I don’t really know about cluches that much. Ie what forces etc.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 108 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Doug, I'm starting to get the occasional slip at beyond 3500 rpm. Looks like time to start shopping around for a new beefy clutch! Had mine for 6 months - guy before me was a mech and he installed new clutch not that long ago but definitely a cheapo job cos I still got the receipt! Need one good for 300 horses cos I need to chase after Dave's 274bhp mint baby!! (probably wont even get anywhere near that tho!)
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 12:57 PM
Subject: RE: [BC-BFLegacyWorks] whining from engine

Yeh I’ve owned my RS for about 5 weeks and the cluth is dead. Just fries at high RPM. Learnt my leason but hay it puts you in your fn seat.

-----Original Message-----
From: Kam [mailto:kam@subarunutter.com]
Sent: Monday, 6 May 2002 9:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] whining from engine

Although probably ok on a GX, one would normally suggest not to dump the clutch at standstill and high rpm on a high powered Scooby - by the time the 4WD system has distributed the power the clutch will have disintergrated!
----- Original Message -----

From: Doug <mailto:Doug_hancock@optusnet.com.au> Hancock

To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, May 06, 2002 11:56 AM
Subject: RE: [BC-BFLegacyWorks] whining from engine

I took a GX 4WD liberty for a test drive one day (for a mate). Reved it to
about 5000 RPM dump the clutch the cluch did not slip one bit but this god
for sacken whin came out of the clutch area. I think that it was the thrust
bearing. It sort of came and went but I think that it was the first time it
had done this in its life and it should of only got worse. Meaning a
continous whin. By the way we left the piece of shit there. This problem was
only minor compared to the other problems.

-----Original Message-----
From: limonoah [mailto:limonoah@hotmail.com]
Sent: Friday, 3 May 2002 7:28 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] whining from engine

I'm trying to find what's causing a whining noise coming from my
engine (EJ20G). Its gets worse as the car warms up, and increases in
volume with higher RPMS. I haven't noticed much loss in power in the
recent weeks, even as the sound has been more noticeable. I have
taken off all the accessories (P/S pump, alternator, A/C) and the
sound continues. Has anybody heard of this before?
-noah

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

ADVERTISEMENT
<http://rd.yahoo.com/M=226014.2032696.35 ... 000239/R=1>
<http://us.adserver.yahoo.com/l?M=226014 ... =329810521>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

georgerbyrne · Post by **georgerbyrne** » Wed May 08, 2002 5:11 am

That's about right Doug! You can get some pretty nice performance
clutches for that much.
But Kam, i would recommend you find a reputable clutch shop in your
town and have him rebuild your old one. They can put a new surface on
them to whatever specs you like, and it doesn't cost too much at all!
Give it a try! George, Australia.

--- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
wrote:
> I think that is the price. Other people feel free to jump in and
tell me if
> im wrong.
>
> -----Original Message-----
> From: Kam [mailto:kam@s...]
> Sent: Tuesday, 7 May 2002 107 PM
> To: BC-BFLegacyWorks@y...
> Subject: Re: [BC-BFLegacyWorks] whining from engine
>
> Looks like I might get one shipped from Oz then

)
> ----- Original Message -----
> From: Doug Hancock <mailto:Doug_hancock@o...>
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Sent: Tuesday, May 07, 2002 127 PM
> Subject: RE: [BC-BFLegacyWorks] whining from engine
>
> Around $1000 Australian for the genuine article. It is a rip off
and there
> are better out there for around the 600 mark. But I still have to
look into
> it. I live in Newcastle Australia. Looks like we got the gun
versions of
> thee Liberty ( Legacy ).
>
> -----Original Message-----
> From: Kam [ mailto:kam@s...]
> Sent: Tuesday, 7 May 2002 1:42 AM
> To: BC-BFLegacyWorks@y...
> Subject: Re: [BC-BFLegacyWorks] whining from engine
>
> UK - I haven't really looked around too much but I do know that
they are
> about 300 - 400 british pounds - AP do one for 400 notes!
> ----- Original Message -----
> From: Doug Hancock <mailto:Doug_hancock@o...>
>
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Sent: Monday, May 06, 2002 2:36 PM
> Subject: RE: [BC-BFLegacyWorks] whining from engine
>
> Where you from Kam. Got any suggestions about a cluch. I was
thinking of a
> ceramic item but I don't really know about cluches that much. Ie
what forces
> etc.
>
> -----Original Message-----
> From: Kam [ mailto:kam@s...]
> Sent: Monday, 6 May 2002 108 PM
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Subject: Re: [BC-BFLegacyWorks] whining from engine
>
> Doug, I'm starting to get the occasional slip at beyond 3500 rpm.
Looks
> like time to start shopping around for a new beefy clutch! Had
mine for 6
> months - guy before me was a mech and he installed new clutch not
that long
> ago but definitely a cheapo job cos I still got the receipt! Need
one good
> for 300 horses cos I need to chase after Dave's 274bhp mint baby!!
(probably
> wont even get anywhere near that tho!)
> ----- Original Message -----
> From: Doug Hancock <mailto:Doug_hancock@o...>
>
>
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Sent: Monday, May 06, 2002 12:57 PM
> Subject: RE: [BC-BFLegacyWorks] whining from engine
>
> Yeh I've owned my RS for about 5 weeks and the cluth is dead. Just
fries at
> high RPM. Learnt my leason but hay it puts you in your fn seat.
>
> -----Original Message-----
> From: Kam [ mailto:kam@s...]
> Sent: Monday, 6 May 2002 9:52 PM
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Subject: Re: [BC-BFLegacyWorks] whining from engine
>
> Although probably ok on a GX, one would normally suggest not to
dump the
> clutch at standstill and high rpm on a high powered Scooby - by the
time the
> 4WD system has distributed the power the clutch will have
disintergrated!
> ----- Original Message -----
> From: Doug Hancock <mailto:Doug_hancock@o...>
>
>
>
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Sent: Monday, May 06, 2002 11:56 AM
> Subject: RE: [BC-BFLegacyWorks] whining from engine
>
> I took a GX 4WD liberty for a test drive one day (for a mate).
Reved it to
> about 5000 RPM dump the clutch the cluch did not slip one bit but
this god
> for sacken whin came out of the clutch area. I think that it was
the thrust
> bearing. It sort of came and went but I think that it was the first
time it
> had done this in its life and it should of only got worse. Meaning a
> continous whin. By the way we left the piece of shit there. This
problem was
> only minor compared to the other problems.
>
> -----Original Message-----
> From: limonoah [mailto:limonoah@h...]
> Sent: Friday, 3 May 2002 7:28 AM
> To: BC-BFLegacyWorks@y...
> Subject: [BC-BFLegacyWorks] whining from engine
>
> I'm trying to find what's causing a whining noise coming from my
> engine (EJ20G). Its gets worse as the car warms up, and increases in
> volume with higher RPMS. I haven't noticed much loss in power in the
> recent weeks, even as the sound has been more noticeable. I have
> taken off all the accessories (P/S pump, alternator, A/C) and the
> sound continues. Has anybody heard of this before?
> -noah
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
>
> ADVERTISEMENT
>
>
<http://rd.yahoo.com/M=226014.2032696.35 ... upweb/S=17
050649
> 83:HM/A=1000239/R=0/*http://ads.x10.com/?
bHlhaG9vaG0xLmRhd=1020773279%3eM=22
>
6014.2032696.3508022.1829184/D=egroupweb/S=1705064983:HM/A=1000239/R=1
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .

------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Toby Corkindale · Post by **Toby Corkindale** » Wed May 08, 2002 5:11 am

I'm in the market for a new clutch ASAP.. Current one slips under high-power
gear changes, or even worse, it slips if you start getting slightly bogged
off road. Got in and out of the field ok, but major clutch stink.

Did better than the people without AWD, about 25% got bogged.

Anyway.. yeah, subaru wanted like $1400 fitted which made me fall off my
seat. (The guy on the phone even said to me "hey, it sounds less if you say
it faster." so at least they had a sense of humour)

I'd be happier paying $600 like you suggested.. Any ideas what brand or make
that clutch was?

(I'm in Adelaide, AU)

Seeya

Toby

On Wed, 8 May 2002, georgerbyrne wrote:

> That's about right Doug! You can get some pretty nice performance
> clutches for that much.
> But Kam, i would recommend you find a reputable clutch shop in your
> town and have him rebuild your old one. They can put a new surface on
> them to whatever specs you like, and it doesn't cost too much at all!
> Give it a try! George, Australia.
>
> --- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
> wrote:
> > I think that is the price. Other people feel free to jump in and
> tell me if
> > im wrong.
> >
> > -----Original Message-----
> > From: Kam [mailto:kam@s...]
> > Sent: Tuesday, 7 May 2002 107 PM
> > To: BC-BFLegacyWorks@y...
> > Subject: Re: [BC-BFLegacyWorks] whining from engine
> >
> > Looks like I might get one shipped from Oz then

)
> > ----- Original Message -----
> > From: Doug Hancock <mailto:Doug_hancock@o...>
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Sent: Tuesday, May 07, 2002 127 PM
> > Subject: RE: [BC-BFLegacyWorks] whining from engine
> >
> > Around $1000 Australian for the genuine article. It is a rip off
> and there
> > are better out there for around the 600 mark. But I still have to
> look into
> > it. I live in Newcastle Australia. Looks like we got the gun
> versions of
> > thee Liberty ( Legacy ).
> >

------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

rodeddy · Post by **rodeddy** » Wed May 08, 2002 6:11 am

yes that about spot on.... got my clutch kit (non genuine with higher
than std clamp force) for around $630,
then of coarse labour for R&R..
...add to this the $55 for flywheel machining also
Rod... in oz. 1992 RS Liberty

--- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
wrote:
> I think that is the price. Other people feel free to jump in and
tell me if
> im wrong.
>
> -----Original Message-----
> From: Kam [mailto:kam@s...]
> Sent: Tuesday, 7 May 2002 107 PM
> To: BC-BFLegacyWorks@y...
> Subject: Re: [BC-BFLegacyWorks] whining from engine
>
> Looks like I might get one shipped from Oz then

)
> ----- Original Message -----
> From: Doug Hancock <mailto:Doug_hancock@o...>
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Sent: Tuesday, May 07, 2002 127 PM
> Subject: RE: [BC-BFLegacyWorks] whining from engine
>
> Around $1000 Australian for the genuine article. It is a rip off
and there
> are better out there for around the 600 mark. But I still have to
look into
> it. I live in Newcastle Australia. Looks like we got the gun
versions of
> thee Liberty ( Legacy ).
>
> -----Original Message-----
> From: Kam [ mailto:kam@s...]
> Sent: Tuesday, 7 May 2002 1:42 AM
> To: BC-BFLegacyWorks@y...
> Subject: Re: [BC-BFLegacyWorks] whining from engine
>
> UK - I haven't really looked around too much but I do know that
they are
> about 300 - 400 british pounds - AP do one for 400 notes!
> ----- Original Message -----
> From: Doug Hancock <mailto:Doug_hancock@o...>
>
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Sent: Monday, May 06, 2002 2:36 PM
> Subject: RE: [BC-BFLegacyWorks] whining from engine
>
> Where you from Kam. Got any suggestions about a cluch. I was
thinking of a
> ceramic item but I don't really know about cluches that much. Ie
what forces
> etc.
>
> -----Original Message-----
> From: Kam [ mailto:kam@s...]
> Sent: Monday, 6 May 2002 108 PM
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Subject: Re: [BC-BFLegacyWorks] whining from engine
>
> Doug, I'm starting to get the occasional slip at beyond 3500 rpm.
Looks
> like time to start shopping around for a new beefy clutch! Had
mine for 6
> months - guy before me was a mech and he installed new clutch not
that long
> ago but definitely a cheapo job cos I still got the receipt! Need
one good
> for 300 horses cos I need to chase after Dave's 274bhp mint baby!!
(probably
> wont even get anywhere near that tho!)
> ----- Original Message -----
> From: Doug Hancock <mailto:Doug_hancock@o...>
>
>
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Sent: Monday, May 06, 2002 12:57 PM
> Subject: RE: [BC-BFLegacyWorks] whining from engine
>
> Yeh I've owned my RS for about 5 weeks and the cluth is dead. Just
fries at
> high RPM. Learnt my leason but hay it puts you in your fn seat.
>
> -----Original Message-----
> From: Kam [ mailto:kam@s...]
> Sent: Monday, 6 May 2002 9:52 PM
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Subject: Re: [BC-BFLegacyWorks] whining from engine
>
> Although probably ok on a GX, one would normally suggest not to
dump the
> clutch at standstill and high rpm on a high powered Scooby - by the
time the
> 4WD system has distributed the power the clutch will have
disintergrated!
> ----- Original Message -----
> From: Doug Hancock <mailto:Doug_hancock@o...>
>
>
>
> To: BC-BFLegacyWorks@y...
> <mailto:BC-BFLegacyWorks@y...>
> Sent: Monday, May 06, 2002 11:56 AM
> Subject: RE: [BC-BFLegacyWorks] whining from engine
>
> I took a GX 4WD liberty for a test drive one day (for a mate).
Reved it to
> about 5000 RPM dump the clutch the cluch did not slip one bit but
this god
> for sacken whin came out of the clutch area. I think that it was
the thrust
> bearing. It sort of came and went but I think that it was the first
time it
> had done this in its life and it should of only got worse. Meaning a
> continous whin. By the way we left the piece of shit there. This
problem was
> only minor compared to the other problems.
>
> -----Original Message-----
> From: limonoah [mailto:limonoah@h...]
> Sent: Friday, 3 May 2002 7:28 AM
> To: BC-BFLegacyWorks@y...
> Subject: [BC-BFLegacyWorks] whining from engine
>
> I'm trying to find what's causing a whining noise coming from my
> engine (EJ20G). Its gets worse as the car warms up, and increases in
> volume with higher RPMS. I haven't noticed much loss in power in the
> recent weeks, even as the sound has been more noticeable. I have
> taken off all the accessories (P/S pump, alternator, A/C) and the
> sound continues. Has anybody heard of this before?
> -noah
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .
>
>
>
>
> ADVERTISEMENT
>
>
<http://rd.yahoo.com/M=226014.2032696.35 ... upweb/S=17
050649
> 83:HM/A=1000239/R=0/*http://ads.x10.com/?
bHlhaG9vaG0xLmRhd=1020773279%3eM=22
>
6014.2032696.3508022.1829184/D=egroupweb/S=1705064983:HM/A=1000239/R=1
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> zZz
> <http://docs.yahoo.com/info/terms/> .

------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

georgerbyrne · Post by **georgerbyrne** » Wed May 08, 2002 7:31 am

Yeah make sure when you get your clutch done to increase the clamping
force on your pressure plate. Standard WRX spec is 1600pounds mine is
now 2200 and i feel it's perfect, really good response yet light
enough for traffic.
George, Brisbane

--- In BC-BFLegacyWorks@y..., "rodeddy" <melrod@o...> wrote:
>
> yes that about spot on.... got my clutch kit (non genuine with
higher
> than std clamp force) for around $630,
> then of coarse labour for R&R..
> ...add to this the $55 for flywheel machining also
> Rod... in oz. 1992 RS Liberty
>
> --- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
> wrote:
> > I think that is the price. Other people feel free to jump in and
> tell me if
> > im wrong.
> >
> > -----Original Message-----
> > From: Kam [mailto:kam@s...]
> > Sent: Tuesday, 7 May 2002 107 PM
> > To: BC-BFLegacyWorks@y...
> > Subject: Re: [BC-BFLegacyWorks] whining from engine
> >
> > Looks like I might get one shipped from Oz then

)
> > ----- Original Message -----
> > From: Doug Hancock <mailto:Doug_hancock@o...>
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Sent: Tuesday, May 07, 2002 127 PM
> > Subject: RE: [BC-BFLegacyWorks] whining from engine
> >
> > Around $1000 Australian for the genuine article. It is a rip off
> and there
> > are better out there for around the 600 mark. But I still have to
> look into
> > it. I live in Newcastle Australia. Looks like we got the gun
> versions of
> > thee Liberty ( Legacy ).
> >
> > -----Original Message-----
> > From: Kam [ mailto:kam@s...]
> > Sent: Tuesday, 7 May 2002 1:42 AM
> > To: BC-BFLegacyWorks@y...
> > Subject: Re: [BC-BFLegacyWorks] whining from engine
> >
> > UK - I haven't really looked around too much but I do know that
> they are
> > about 300 - 400 british pounds - AP do one for 400 notes!
> > ----- Original Message -----
> > From: Doug Hancock <mailto:Doug_hancock@o...>
> >
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Sent: Monday, May 06, 2002 2:36 PM
> > Subject: RE: [BC-BFLegacyWorks] whining from engine
> >
> > Where you from Kam. Got any suggestions about a cluch. I was
> thinking of a
> > ceramic item but I don't really know about cluches that much. Ie
> what forces
> > etc.
> >
> > -----Original Message-----
> > From: Kam [ mailto:kam@s...]
> > Sent: Monday, 6 May 2002 108 PM
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Subject: Re: [BC-BFLegacyWorks] whining from engine
> >
> > Doug, I'm starting to get the occasional slip at beyond 3500
rpm.
> Looks
> > like time to start shopping around for a new beefy clutch! Had
> mine for 6
> > months - guy before me was a mech and he installed new clutch not
> that long
> > ago but definitely a cheapo job cos I still got the receipt!
Need
> one good
> > for 300 horses cos I need to chase after Dave's 274bhp mint
baby!!
> (probably
> > wont even get anywhere near that tho!)
> > ----- Original Message -----
> > From: Doug Hancock <mailto:Doug_hancock@o...>
> >
> >
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Sent: Monday, May 06, 2002 12:57 PM
> > Subject: RE: [BC-BFLegacyWorks] whining from engine
> >
> > Yeh I've owned my RS for about 5 weeks and the cluth is dead.
Just
> fries at
> > high RPM. Learnt my leason but hay it puts you in your fn seat.
> >
> > -----Original Message-----
> > From: Kam [ mailto:kam@s...]
> > Sent: Monday, 6 May 2002 9:52 PM
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Subject: Re: [BC-BFLegacyWorks] whining from engine
> >
> > Although probably ok on a GX, one would normally suggest not to
> dump the
> > clutch at standstill and high rpm on a high powered Scooby - by
the
> time the
> > 4WD system has distributed the power the clutch will have
> disintergrated!
> > ----- Original Message -----
> > From: Doug Hancock <mailto:Doug_hancock@o...>
> >
> >
> >
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Sent: Monday, May 06, 2002 11:56 AM
> > Subject: RE: [BC-BFLegacyWorks] whining from engine
> >
> > I took a GX 4WD liberty for a test drive one day (for a mate).
> Reved it to
> > about 5000 RPM dump the clutch the cluch did not slip one bit but
> this god
> > for sacken whin came out of the clutch area. I think that it was
> the thrust
> > bearing. It sort of came and went but I think that it was the
first
> time it
> > had done this in its life and it should of only got worse.
Meaning a
> > continous whin. By the way we left the piece of shit there. This
> problem was
> > only minor compared to the other problems.
> >
> > -----Original Message-----
> > From: limonoah [mailto:limonoah@h...]
> > Sent: Friday, 3 May 2002 7:28 AM
> > To: BC-BFLegacyWorks@y...
> > Subject: [BC-BFLegacyWorks] whining from engine
> >
> > I'm trying to find what's causing a whining noise coming from my
> > engine (EJ20G). Its gets worse as the car warms up, and increases
in
> > volume with higher RPMS. I haven't noticed much loss in power in
the
> > recent weeks, even as the sound has been more noticeable. I have
> > taken off all the accessories (P/S pump, alternator, A/C) and the
> > sound continues. Has anybody heard of this before?
> > -noah
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> >
> > ADVERTISEMENT
> >
> >
>
<http://rd.yahoo.com/M=226014.2032696.35 ... upweb/S=17
> 050649
> > 83:HM/A=1000239/R=0/*http://ads.x10.com/?
> bHlhaG9vaG0xLmRhd=1020773279%3eM=22
> >
>
6014.2032696.3508022.1829184/D=egroupweb/S=1705064983:HM/A=1000239/R=1
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .

------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Doug Hancock · Post by **Doug Hancock** » Wed May 08, 2002 9:51 am

I knew mine was just sliping when I bought it 4000km ago and now I dump the
clutch at about 5000rpm and I sare I seen smoke. No more of that for a
while. It was pretty hot at the time though. It has 16400km on the clock and
it is standard. I dare say I would put it in myself and maybe a lightend
flywheel if I have some money left over.
Regards Doug
Newcastle Australia.

-----Original Message-----
From: georgerbyrne [mailto:georgerbyrne@yahoo.com]
Sent: Wednesday, 8 May 2002 9:22 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: whining from engine

Yeah make sure when you get your clutch done to increase the clamping
force on your pressure plate. Standard WRX spec is 1600pounds mine is
now 2200 and i feel it's perfect, really good response yet light
enough for traffic.
George, Brisbane

--- In BC-BFLegacyWorks@y..., "rodeddy" <melrod@o...> wrote:
>
> yes that about spot on.... got my clutch kit (non genuine with
higher
> than std clamp force) for around $630,
> then of coarse labour for R&R..
> ...add to this the $55 for flywheel machining also
> Rod... in oz. 1992 RS Liberty
>
> --- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
> wrote:
> > I think that is the price. Other people feel free to jump in and
> tell me if
> > im wrong.
> >
> > -----Original Message-----
> > From: Kam [mailto:kam@s...]
> > Sent: Tuesday, 7 May 2002 107 PM
> > To: BC-BFLegacyWorks@y...
> > Subject: Re: [BC-BFLegacyWorks] whining from engine
> >
> > Looks like I might get one shipped from Oz then

)
> > ----- Original Message -----
> > From: Doug Hancock <mailto:Doug_hancock@o...>
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Sent: Tuesday, May 07, 2002 127 PM
> > Subject: RE: [BC-BFLegacyWorks] whining from engine
> >
> > Around $1000 Australian for the genuine article. It is a rip off
> and there
> > are better out there for around the 600 mark. But I still have to
> look into
> > it. I live in Newcastle Australia. Looks like we got the gun
> versions of
> > thee Liberty ( Legacy ).
> >
> > -----Original Message-----
> > From: Kam [ mailto:kam@s...]
> > Sent: Tuesday, 7 May 2002 1:42 AM
> > To: BC-BFLegacyWorks@y...
> > Subject: Re: [BC-BFLegacyWorks] whining from engine
> >
> > UK - I haven't really looked around too much but I do know that
> they are
> > about 300 - 400 british pounds - AP do one for 400 notes!
> > ----- Original Message -----
> > From: Doug Hancock <mailto:Doug_hancock@o...>
> >
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Sent: Monday, May 06, 2002 2:36 PM
> > Subject: RE: [BC-BFLegacyWorks] whining from engine
> >
> > Where you from Kam. Got any suggestions about a cluch. I was
> thinking of a
> > ceramic item but I don't really know about cluches that much. Ie
> what forces
> > etc.
> >
> > -----Original Message-----
> > From: Kam [ mailto:kam@s...]
> > Sent: Monday, 6 May 2002 108 PM
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Subject: Re: [BC-BFLegacyWorks] whining from engine
> >
> > Doug, I'm starting to get the occasional slip at beyond 3500
rpm.
> Looks
> > like time to start shopping around for a new beefy clutch! Had
> mine for 6
> > months - guy before me was a mech and he installed new clutch not
> that long
> > ago but definitely a cheapo job cos I still got the receipt!
Need
> one good
> > for 300 horses cos I need to chase after Dave's 274bhp mint
baby!!
> (probably
> > wont even get anywhere near that tho!)
> > ----- Original Message -----
> > From: Doug Hancock <mailto:Doug_hancock@o...>
> >
> >
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Sent: Monday, May 06, 2002 12:57 PM
> > Subject: RE: [BC-BFLegacyWorks] whining from engine
> >
> > Yeh I've owned my RS for about 5 weeks and the cluth is dead.
Just
> fries at
> > high RPM. Learnt my leason but hay it puts you in your fn seat.
> >
> > -----Original Message-----
> > From: Kam [ mailto:kam@s...]
> > Sent: Monday, 6 May 2002 9:52 PM
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Subject: Re: [BC-BFLegacyWorks] whining from engine
> >
> > Although probably ok on a GX, one would normally suggest not to
> dump the
> > clutch at standstill and high rpm on a high powered Scooby - by
the
> time the
> > 4WD system has distributed the power the clutch will have
> disintergrated!
> > ----- Original Message -----
> > From: Doug Hancock <mailto:Doug_hancock@o...>
> >
> >
> >
> > To: BC-BFLegacyWorks@y...
> > <mailto:BC-BFLegacyWorks@y...>
> > Sent: Monday, May 06, 2002 11:56 AM
> > Subject: RE: [BC-BFLegacyWorks] whining from engine
> >
> > I took a GX 4WD liberty for a test drive one day (for a mate).
> Reved it to
> > about 5000 RPM dump the clutch the cluch did not slip one bit but
> this god
> > for sacken whin came out of the clutch area. I think that it was
> the thrust
> > bearing. It sort of came and went but I think that it was the
first
> time it
> > had done this in its life and it should of only got worse.
Meaning a
> > continous whin. By the way we left the piece of shit there. This
> problem was
> > only minor compared to the other problems.
> >
> > -----Original Message-----
> > From: limonoah [mailto:limonoah@h...]
> > Sent: Friday, 3 May 2002 7:28 AM
> > To: BC-BFLegacyWorks@y...
> > Subject: [BC-BFLegacyWorks] whining from engine
> >
> > I'm trying to find what's causing a whining noise coming from my
> > engine (EJ20G). Its gets worse as the car warms up, and increases
in
> > volume with higher RPMS. I haven't noticed much loss in power in
the
> > recent weeks, even as the sound has been more noticeable. I have
> > taken off all the accessories (P/S pump, alternator, A/C) and the
> > sound continues. Has anybody heard of this before?
> > -noah
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> >
> > ADVERTISEMENT
> >
> >
>
<http://rd.yahoo.com/M=226014.2032696.35 ... upweb/S=17
> 050649
> > 83:HM/A=1000239/R=0/*http://ads.x10.com/?
> bHlhaG9vaG0xLmRhd=1020773279%3eM=22
> >
>
6014.2032696.3508022.1829184/D=egroupweb/S=1705064983:HM/A=1000239/R=1
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans