Engine swap questions

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
Pi
In Neutral
Posts: 2
Joined: Mon May 05, 2003 7:43 am
Location: Australia

Engine swap questions

Post by Pi »

I have found a half cut with an EJ20t engine which i want to put in my '92 Liberty GX (not sure which legacy this is equivalent to). I presume it's a manual, and mine is auto. What modifications will need to be made? Will it also be possible to do a auto -> manual conversion with the parts from a half cut? Any help would be greatly appreciated, as this is my first car and i'm not very experienced in this kind of stuff. Thanks.
Top
Pi
In Neutral
Posts: 2
Joined: Mon May 05, 2003 7:43 am
Location: Australia

Post by Pi »

Turns out its not a half cut, just the engine. What else will i need to change? Thanks.
Top
submannz
In Neutral
Posts: 19
Joined: Fri May 09, 2003 12:09 am
Location: Auckland, New Zealand

Post by submannz »

You should only need to change the flywheel
Top
Mark Ward
First Gear
Posts: 82
Joined: Fri Oct 18, 2002 2:41 am
Location: Calgary, Canada
Contact:
Contact Mark Ward

Post by Mark Ward »

And the pedal box..
Mark
Top
JasonGrahn
Knowledgeable
Knowledgeable
Posts: 1333
Joined: Tue Oct 15, 2002 4:55 pm
Location: Seattle, WA
Contact:
Contact JasonGrahn

Post by JasonGrahn »

and the loose nut behind the steering wheel!!! hahahaha
-Jason Grahn
Top
Post Reply

Return to “Engine”