Page 1 of 1
will this clutch fit??? help please
Posted: Wed May 21, 2003 11:03 pm
by legacy32656
i have a 90 subaru legacy 2.2 wagon. which is going to become a turbo car. in a few months. i cam acrossed a monster clutch cheap will it work it cam off a legacy twin turbo rs. he says it "It will fit all turbo subarus that have a pull style hydro clutch." is this what the 90 legacy have? so will it work or not any info glady apperciated....
thanks brian
Posted: Wed May 21, 2003 11:43 pm
by DLC
The Turbo Legacy and WRX share the same transmission design, which is also shared with the Twin-Turbo overseas models.
Your transmission is not this type, it's not even hydraulic, so unless you're replacing the transmission as well, it will not fit.
Dave
Posted: Thu May 22, 2003 2:44 am
by submannz
You will just have to uprate your pressure plate, as mentioned here the clutch types need the equivalent bell housing which is part of the gearbox housing also.
Posted: Thu May 22, 2003 4:25 am
by JasonGrahn
matter of factly, the transmission housings are the same between the turbo and non-turbo. If you change the pivot point that the clutch fork sits on, you should be able to use the turbo-type clutch.
granted, from my understanding, you'll also need the hydraulic assemblies to go with it.
Posted: Thu May 22, 2003 3:53 pm
by vrg3
Posted: Thu May 22, 2003 4:18 pm
by Brat4by4
i believe that's the one he is talking about all along.
Posted: Thu May 22, 2003 10:49 pm
by legacy32656
thats the one .. its is on ebay