legacycentral bbs

Posted: **Wed Apr 14, 2004 2:21 am**

ok im confused . when the offsets get bigger in number the wheels stick out less and when the numbers are smaller they stick out more?

Posted: **Wed Apr 14, 2004 2:49 am**

Yes, that's right.

Posted: **Wed Apr 14, 2004 7:16 pm**

i want to get rims that sit flush with the fenders not tucked inside or sticking out. would 42s work or would they stick out too far? and the same question for 48s

Posted: **Wed Apr 14, 2004 7:19 pm**

you may just want to go to a les schwab or something and see if they'll let you test fit. some places do

Posted: **Wed Apr 14, 2004 7:26 pm**

it depends mostly on what width the wheel is

Posted: **Wed Apr 14, 2004 7:36 pm**

THAWA wrote:it depends mostly on what width the wheel is

Werd. . . increased width will almost always mean a different offset, to keep the wheel's mass centered around the hub.

Posted: **Thu Apr 15, 2004 12:17 am**

a larger positive offset will suck the wheel into the fender. You'll most likely rub with anything less then +45mm of offset.

Posted: **Wed Apr 28, 2004 10:42 pm**

I just put Rota's on my 90 wgn. at 48 mm they fit perfect.