Forester XT Exidy Clutch Application

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
simonasaur
First Gear
Posts: 104
Joined: Sat Apr 26, 2003 8:51 pm
Location: portland, OR

Forester XT Exidy Clutch Application

Post by simonasaur »

My debocel started yesterday afternoon at 2.
Me and Seth pulled my 2.2t out of my 91 legbo at Rallitek, our intention was to replace the engine mounts w/ group n and to install a new clutch. The clutch in question was a slightly used exidy unit suposibly
looking for a 93-01 impreza shell!!! pm me
kleinkid
Fourth Gear
Posts: 1212
Joined: Fri Jan 24, 2003 3:39 am
Location: Oak Harbor, Washington

Post by kleinkid »

Rallitek did a clutch changeout for me on my 91SS right after Christmas. Sean and the mechanics knows my car, the clean one. ACT clutch Exedy pressure plate. With these parts the friction point was way down on the floor. I did not like it. I know of a fix for this condition if yours turns out the same way. I briefed Sean on the problem/solution. If you have questions ask him or e-mail me. I posted several times about this, you could look at those for more info. Might be helpful.
Post Reply