When pulling an EJ22T....

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
legacy92ej22t
Knowledgeable
Knowledgeable
Posts: 5203
Joined: Thu Nov 07, 2002 3:59 am
Location: Cogan Station, PA

When pulling an EJ22T....

Post by legacy92ej22t »

and you have pulled the clutch fork rod. Do you still have to pull the actual clutch fork up out of the tranny or do you just pull the rod? TIA
-Matt

'92 SS 5mt. All go and no show. Sold :(
'94 Audi UrS4 Modded (new project)
'96 Outback 5mt.
'07 Legacy 2.5i SE

[quote="Redlined"]
Oh... and I hope the fucker get bunked with Gunter, arrested for raping Gorillas.[/quote]
Top
heelhooker
First Gear
Posts: 59
Joined: Mon May 03, 2004 6:30 am
Location: berkeley, CA

Post by heelhooker »

You have to pull the fork up so that it disengages from the throw out bearing. You'll be able to feel it when this occurs.

The fork does not need to come out of the bell housing (I don't think it would fit anyway).
1991 ss 5mt ej20g (sold)
1988 mazda 323 gtx
2005 EVO RS
Top
Post Reply

Return to “Engine”