wtb tranny

eph · Post by **eph** » Fri Dec 30, 2005 8:21 am

anyone have a tranny for sale... cable clutch 4.11 gearing?

Blackbart · Post by **Blackbart** » Fri Dec 30, 2005 9:58 am

I do.

eph · Post by **eph** » Fri Dec 30, 2005 1:08 pm

yeah but shipping from pa to wa is going to be way too much.

professor · Post by **professor** » Fri Dec 30, 2005 3:43 pm

not too bad maybe, Fedex ground with a business discount probably well under $100

eph · Post by **eph** » Fri Dec 30, 2005 3:44 pm

well can you check shipping to 98444 and how much would you want for the transmission.

Blackbart · Post by **Blackbart** » Fri Dec 30, 2005 5:18 pm

Anybody have a rough guess as to the weight of this? Just a number that I can use to estimate the shipping.

eph · Post by **eph** » Fri Dec 30, 2005 5:20 pm

just say 125

Matt Monson · Post by **Matt Monson** » Fri Dec 30, 2005 6:20 pm

Actually I do this all the time. They weigh about 175lb on a pallet. But they will charge you dimensional weight when you give them the measurements and they tend to bill at 200lbs based on that. The last one I shipped went from Co to CA. $125 delivered to a business. If it goes to a residence, it's about $75 more. This is using Bax Global and with my commercial discount...

eph · Post by **eph** » Fri Dec 30, 2005 6:22 pm

so close to 300 bucks shipped not including payment for the tranny itself.

supernoob · Post by **supernoob** » Fri Dec 30, 2005 7:12 pm

I have a FWD tranny from a 90 Leg for $200. I'm just 2 hours down I-5.

professor · Post by **professor** » Fri Dec 30, 2005 7:27 pm

pack it into a fiber drum (55 gal size) that will allow it to be moved with a hand truck.

its the pallet that's killing you, that is too big and it puts you into dimensional weight, and extra charges for non-commercial docks

a fiber drum, business to business will be under $100 easily.

Matt Monson · Post by **Matt Monson** » Fri Dec 30, 2005 9:55 pm

Where the hell do I get a fiber drum? What's a fiber drum? You mean like fiber board drum? I'm still not buying under $100, even like that. I have shipped EJ22T shortblocks through UPS (without an account) and they run $100. And that's for 100lbs. A packed tranny will weigh more than that...

It's the residential delivery that kills you. Do any friends or family have a business? Any business, that you can take delivery at? That will save you the $75. You just need to make sure 2 guys are there to remove it. $35 of that $75 is a liftgate.

eph · Post by **eph** » Sat Dec 31, 2005 2:30 am

to the person who mentioned FWD... won't work i need an AWD tranny. Plus i was told that the tranny is different in size between the 90 and the 91-94 tranny.

toomuch · Post by **toomuch** » Sat Dec 31, 2005 3:16 am

There is a 4.11 5mt at the PAP in Oympia by the airport, prolly $175+-
Call 'em 360-357-4466

eph · Post by **eph** » Sun Jan 01, 2006 3:04 pm

thanks for telling me, i'll have to give them a call. would you by any chance have an address?

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

wtb tranny

wtb tranny