legacycentral bbs

Just reusing the same post I used locally, so it's no all pertinant... shipping can be arranged for anything you gys are interested in. Some ppl here had interest in some parts and I wasn't able to get back to you on them in a timely fashion sorry about that, however if still interested please let me know.

Please note shipping is from Brampton, Ontario, Canada. Use www.UPS.ca and my postal code "L6Y-3J3" to calculate your shipping costs in CDN funds.

Listed prices are in Canadian funds, make offers on any parts from the legacys and state if in USD$ or CDN$. Thanks guys.

------------------------------------------------------------------------------

II currently have a few cars i'm parting out and some interior parts from the track/rally cars, I can start pulling some items now but any major stuff will have to wait until I start the tear down process

1) 1992 Legacy Turbo Sedan (complete car minus engine/tranny)
- black exterior/grey turbo interior

2) 1992 Legacy Turbo Wagon (complete car minus engine)
- black exterior/93 black turbo interior (this car was a late 92 model)
- 4EAT

3) From 1993 Impreza L Sedan
- 1.8L FWD
- 5MT w/ 2nd gear whine

4) From 1992 Legacy Turbo Sedan
- complete interior minus the dash
- complete sunroof assembly and glass (no leaks)
- complete working A/C system
- hard brake lines (ABS model)

5) 1991 Infiniti G20; great winter beater or fixer upper
- Automatic
- SR20DE
- Sunroof
- Fully loaded
- Tan leather interior
- 240,000kms on chassis ~40,000 on engine
- A/C does not work
- needs body work





6) 1987.5 Jaguar Sovereign XJ6
- Charcoal Silver on Gray leather
- Automatic
- 6 Cyl
- email for more info please



also from a '91 turbo (aka chrome handles)
- set of spare doors in black w/red pinstripe, fronts have glass

Items I'm planning on keeping (From Turbo legacys 1 & 2)
- both blocks
- 5spd tranny
- sedan dash
- alloy wheels

Aside from that most everything else is up for grabs.

Parts that may be of interest:
- 2 Turbo Crossmembers (perfect for any GC/BG swap)
- 18mm Rear sway bar fits BC & GC
- VENTED rear brake setup
- hoodscoops and spoiler
--------------------------------------------------------------------------------------------------

Other stuff:

- Pre-made lines with factory fitted 1/2"NPT ends (for oil coolers and filter relocation kits); $10 (not braided line on left)


- Go Fast Bits MBC in silver, used but comes with complete original packaging; $50

http://www.gofastbits.com/index.php?par ... ion=atomic

- 4x Michelin Pilot XGT H4 205/60/15 3/16" tread depth; $150 (tire on right)


- 2005 Legacy Outback Front (L&R) complete suspension shocks/springs/top hats, brand new dealer take offs (<200kms) don't think there is even rust on them; make an offer


- SAAB FMIC, rad style with plastic endtanks; $50



- New OEM Hella Fogs (Dodge Ram), glass lens with adjustable mounts w/9006 55w bulbs; $50 pair (L&R)


No pics yet for the following:
- Kingdragon 4pt harness (1x), made in italy, blue 2"belts (used); $75
- OEM Legacy GT Spoiler green (2000-2004) new without mounting hardware; $100

New Items as of 04/30/06; OBO unless otherwise listed.

- Polyurethane rear sway bar bushings
- 24mm for heavy duty mount
- Whiteline 22mm for heavy duty mount
- Whiteline 22mm for stock mount


- Stock WRX Bypass Valve


- OEM Tweeter Kit for 1995-97 Legacy, brand new.


- OEM Tweeter Kit for Forester, brand new.


- HKS Turbo Timer (not sure if type-0 or 1) w/WRX Harness, scuff marks on top and minor scuffs on face; $80


New Item/Pics as of 05/08/06

Corbeau Clubman seat, provisions for 5/6pt harnesses, w/ passenger side bracket/slider for GC/BC, worn where white leather piece is; $100


- 2000/01 RS 6-Spoke rim (only 1) w/ Goodyear 205/55/16 Tire, some minor chips and scuffing, perfect as a full size spare; $100


- 02 WRX TMIC; $125



Free:
- 2.5" Fart Can
- 2x Pirelli Winter tires 15" not much tread left

Reasonable offers accepted. Higher res pics by email. Items can be picked up in brampton. Thanks

SOLD Thank you.
- Bomz underdrive aluminum crank pulley with belt (<500kms on this, selling since I run lots of aux lights) fits EJ series motors; $75
- BSCI FIA 8857-2001 Type A Homologated Roll Cage Padding; 1 3/4" - 2" (QTY = 1) & 1 1/4 1 5/8" (QTY = 2), all are uncut and unused lengths of 3ft w/adhesive backing; $20 each (normally $22USD + shipping/duties etc)
- STi uncut keys (x3), larger of the 2 subaru key sizes; $25
- Misc 3"Dia. Intake section with 3x PCV fittings 3"OD; $10
- ABS cut off switch, will plug in where your ABS fuse goes and includes inline ATO fuse holder, just needs mounting (wire allows for mounting within 3ft of fuse box); $10
- Set of 4 center caps for 2000/01 RS 6 spoke rims
- WRX Hoodscoop, painted flat black and notched to fit around windshield sprayers
- WRX stock intercooler y-pipe

"WRX Hoodscoop"

how much? and how much would shipping be to kelowna bc? vix 4p8?

honestly if i haven't listed a price I have no idea what to ask and as such have left it to offers.

$25cdn + shipping?

that's not a postal code, the "i" should be a number

v1x 4p8
find out how much shipping would be
any more pictures?
feal free to add me to msn llooggaann@hotmail.com

What happened Nuwan ? Are you giving up your Legacy turbo???

Ben

bmxkelowna: yikes just under 25 in shipping alone There is one person who has dibbs on it before you however, it's dependent on if he takes it first.

Ben: oh i'm nowhere close to giving up on my car, I just need to get the cage certified and fix up the skidplates and i'll be doing my 1st performance rally at black bear. giving up is a long way off!

alright let me know if that fall though

Do you have the manual seatbelts? PM me with what you want and shipping to 83814. Thanks

Good to hear that man, and if time allow, I will come by and support you.
Good luck man!

Ben

Had some requests for badges/trim from the parts cars, then noticed the fancy badging the legacy wagon has, thought someone might want it.





Also of note, I have 1 full set of manual seatbelts from the wagon if anyone is interested, the manual belts from both SS sedans are now sold/dibbed. Thanks!

any word on the scoop?

sorry looks like it's taken, if he doesn't pick it up you are next in line

What are the dimensions of the FMIC?

I think laurel might flip over those dash pieces, if she doesn't already have them.

you dont happen to have a silver drivers door do you?

I'd take the TW badges if you still got em. It'd cover up the hole from the *^%(*^%(*&% height switch for the air suspension.

did you sell the Y pipe off of the wrx intercooler? if not please let me know interested in the intercooler, shipped to Victoria, BC, Can.

how much for an ac compressor?? mine just took a shit on me.

i want your black interior parts:

front driver/pass door skins

and from the sedan:

i want the trunk latch metal part (on actual trunk lid)
and the gas flap/trunk latch plastic levers from the inside.

please pm me or email
missminnow@msn.com

will give you $20/skin (if it is in good condition, and you throw in all the clips you can salvage, i know some will be broken)
$10 for the latch
and another $10 for the levers and pay for shipping.

Hey, I need some parts for my 1991 Subaru Legacy Turbo. Are you available tonight or tomorrow night for them? I need a stock 15" alloy rim, front exhaust peice between the headers? at the very front of the car, at the bottom. Also need to either tke appart the rear differential for some bushings, or just take the whole thing?

I need them asap. Selling my subaru by the end of this week.

Tom
416-898-2115

do you have any boost guages/ mbc to go with the TMIC?

anything left from these two cars?

My 1992 Legacy L does NOT have a rear sway bar. What would it cost for you to get me one from one of your turbos including all the other parts attached that I'd need to mount it, including a very rough shipping estimate to Nashua, NH, USA?

EDIT: Never mind, I do have a front sway bar, silly me--of course I do! I just need a rear one.

I might be interested in lateral links, sway bar, mounts and endlinks too like the above guy if the price is right.

Crap I hope this doesn't get competitive... But I bet NuwanD hopes it does...