WTB: A shorter clutch master cylinder -wrx?-
Posted: Sat May 06, 2006 2:08 am
I need to buy a shorter master cylinder, so I can install me tmic. The reservior on mine is much too tall.
legacycentral bbs
A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans
https://bbs.legacycentral.org/
WTB: A shorter clutch master cylinder -wrx?-
Page 1 of 1
Posted: Sat May 06, 2006 2:18 am
Take off the "hose clamp" remove the resevior cut the bottom off and reinstall in reverse order.
Posted: Sat May 06, 2006 2:30 am
Really?napphappy wrote:Take off the "hose clamp" remove the resevior cut the bottom off and reinstall in reverse order.
How much should I cut off? How much capacity is actually needed for proper function?
It seems so simple
Posted: Sat May 06, 2006 3:14 pm
Yeah, I cut off a bit of mine too (after picking up a spare reservoir neck from Subaru, about $12) when I had my TMIC in there.
The reservoir is just that, a reservoir. I only cut off up to one of those lines, but you should theoretically be able to cut off as much as you want. You just have that much less reserve fluid.
The reservoir is just that, a reservoir. I only cut off up to one of those lines, but you should theoretically be able to cut off as much as you want. You just have that much less reserve fluid.
Posted: Sat May 06, 2006 3:30 pm
Well I am going to try it today and see if I cant get the car started sometime today.
Thanks for your help.
Even though this is in the parts shed, it sure was cheap
Thanks for your help.
Even though this is in the parts shed, it sure was cheap
Posted: Sat May 06, 2006 7:26 pm
We all bout cheap here.
Posted: Sun May 07, 2006 12:46 am
Word!!