Now I just have to receive it and install it.
I also picked up a WRX hoodscoop a few days ago to get for air moving over that bish.
W00T!! Won a WRX TMIC today.
Moderators: Helpinators, Moderators
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
W00T!! Won a WRX TMIC today.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
bmxkelowna
- Fourth Gear
- Posts: 1047
- Joined: Thu Feb 16, 2006 5:00 am
- Location: kelowna bc canada
- Contact:
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
Yup.
Didn't hurt that a friend of mine was parting out an '02 WRX......
Didn't hurt that a friend of mine was parting out an '02 WRX......
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
I just received it today.
Looks good.
It's gonna take more modifying than I had originally thought, but it still shouldn't be too bad.
Was thinking of making brackets that attach to the stock mounting location for the coolant tank, but move it to the right some and forward (toward the radiator).
Also, I need to find a better place to mount the ignitor. Where I have it now (where the cruise actuator is stock) seems to interfere, though that's just what I can tell holding it over the engine compartment.
Looks good.
It's gonna take more modifying than I had originally thought, but it still shouldn't be too bad.
Was thinking of making brackets that attach to the stock mounting location for the coolant tank, but move it to the right some and forward (toward the radiator).
Also, I need to find a better place to mount the ignitor. Where I have it now (where the cruise actuator is stock) seems to interfere, though that's just what I can tell holding it over the engine compartment.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS