Page 1 of 1
Exhaust/engine parts question on swap
Posted: Fri Jul 14, 2006 3:55 am
by jricher
I am replacing an ej22 engine in a Subaru legacy with another EJ22. The problem I'm having is that the exhaust manifold on the original engine has one hole (two bolts) and the new engine has two holes (three bolts). Is there an easy fix for this problem?
Posted: Fri Jul 14, 2006 2:46 pm
by sammydafish
You can get the front pipe off a 95 or 96 legacy. It'll have the 2 port exhaust. You must have a 97+ 2.2 They are the rare bird subaru exhaust wise. Everything else is 2 port. Actualy a front pipe off an EJ25 car should work too.
Auto Salvage
Posted: Fri Jul 14, 2006 11:48 pm
by jricher
Thanks,
I'm off to call the junkyards.
Posted: Sat Jul 15, 2006 7:40 pm
by MRtuningCO
swap deh heads