Page 1 of 1
short throw shifter?
Posted: Sat Jul 29, 2006 1:24 am
by crawlerdan
what short shifter will work for my 94 legacy?
1998-2004 impreza 5spd?
subaru part # is c1010fa001
if this wont fit, what can i buy that will?
Posted: Sat Jul 29, 2006 2:32 am
by Legacy777
There is no short shifter that will work with the stock linkage & joint, however you can swap to the new style shifter joint & wrx linkage and use pretty much anything meant for the WRX.
http://bbs.legacycentral.org/viewtopic.php?t=16268
http://bbs.legacycentral.org/viewtopic. ... rt+shifter
Posted: Sat Jul 29, 2006 2:41 am
by crawlerdan
thanks a bunch man, i appreciate it alot!!
later-=dan
Posted: Sat Jul 29, 2006 3:29 am
by 206er
I cut mine apart and TIG'd an extension piece between the pivots so you might consider that.
Posted: Sat Jul 29, 2006 7:27 pm
by livestrong14
Posted: Sun Jul 30, 2006 4:56 am
by Adam West
No. Remove your shift boot and look at what you've got there...that would be female to female. You gotta replace the linkage like the above message says...
Posted: Mon Dec 11, 2006 1:06 am
by legacymax
I am bring this back from the dead i know but i found this: first one
http://www.bmracing.com/index.php?id=pr ... &subcat=15
Posted: Mon Dec 11, 2006 1:29 am
by livestrong14
would that fit a 91-92 aswell?
Posted: Mon Dec 11, 2006 4:27 am
by n2x4
The first shifter on that link is for a SRT-10. If you mean this one:
http://www.bmracing.com/index.php?id=pr ... 15&pid=195
Then it won't fit the 90-92. Just look at the difference between the versions, not even close.
Posted: Mon Dec 11, 2006 8:23 pm
by Legacy777
If it fits a 92-94 legacy, it should fit a 90-91.
You'd probably have better luck fitting this guy in:
http://www.bmracing.com/index.php?id=pr ... 15&pid=198
Posted: Tue Dec 12, 2006 4:52 am
by legacymax
That is the link i wanted.
-max
Posted: Tue Dec 12, 2006 5:19 am
by Adam West
Won't work on our cars tho. Not without updating the rest of the linkage.