Blending in STi hoodscoop

Anything and Everything about the Body, from paint to undercoating and interior, including in-car entertainment (ICE).

Moderators: Helpinators, Moderators

Post Reply
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Blending in STi hoodscoop

Post by Splinter »

First attempt at bodywork...

Image
Image
Image
Image


More to come!
98 Steel Widebody RSTi-RA Superbeast
Top
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Post by Splinter »

Image
Image
98 Steel Widebody RSTi-RA Superbeast
Top
IronMonkeyL255
Fourth Gear
Posts: 1902
Joined: Sat Aug 09, 2003 5:02 pm
Location: Woodruff, SC

Post by IronMonkeyL255 »

That doesn't look too bad.

Just take your time making sure everything is REALLY smooth and it should turn out okay.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.

That being said, everything I post is accurate to the best of my knowledge.

Rio Red '91 Legacy SS
Top
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Post by Splinter »

Image
Image
98 Steel Widebody RSTi-RA Superbeast
Top
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Post by Splinter »

It needs a bit more bondo in a couple places, some more sanding, another coat of paint and a coat of clearcoat, but here it is:

Image
Image




opinions?
98 Steel Widebody RSTi-RA Superbeast
Top
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Post by Splinter »

48 views and only one person has an opinion of it? :evil:
98 Steel Widebody RSTi-RA Superbeast
Top
kleinkid
Fourth Gear
Posts: 1212
Joined: Fri Jan 24, 2003 3:39 am
Location: Oak Harbor, Washington

Post by kleinkid »

Ii's Sunday in August, the whole board has been slow. Keep the pics coming until you are finished. It is going to look good when you are done.
Top
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Post by Splinter »

And on the car...


Image

Image
98 Steel Widebody RSTi-RA Superbeast
Top
jnorion
Third Gear
Posts: 558
Joined: Thu Jan 26, 2006 9:04 am
Location: Portland, OR

Post by jnorion »

The scoop sticks out more than I personally like... I prefer the stock SS scoop. But the molding job looks great.
~Joel
1991 Legacy LSi sedan | 1990 Legacy L wagon
Top
mikec
Third Gear
Posts: 893
Joined: Tue Jan 21, 2003 8:27 pm
Location: Toronto, Ontario
Contact:
Contact mikec

Post by mikec »

I think it looks good!
"That shouldn't be a problem, since I do regularly visit the realm of subatmospheric manifold pressures." -- vrg3
Top
entirelyturbo
quasi-mod-o
quasi-mod-o
Posts: 6000
Joined: Thu Dec 05, 2002 7:06 pm
Location: Tampa, FL

Post by entirelyturbo »

What STi is it from?

It's not a USDM STi, that's for sure! ;)

I like it.
2000 Subaru Legacy B4 RSK

"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"

*Formerly DerFahrer*

@entirelyturbo on social media, including Facebook, Instagram, Twitter, and TikTok
Top
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Post by Splinter »

Not sure what year actually.

I got it for $5 tho :P
98 Steel Widebody RSTi-RA Superbeast
Top
skid542
Fifth Gear
Posts: 2857
Joined: Fri Dec 26, 2003 6:37 am
Location: North Idaho

Post by skid542 »

Hahaha.

Looks nice though. A little more filler and patience sanding and it'll blend in great.
Lee

93' SS, 5mt swapped, 182k, not stock...
96' N/A OBW 5sp, 212k, Couple mods... RIP
99' N/A OBW, 4eat, mostly stock.
Top
Yukonart
Cradle Robber
Cradle Robber
Posts: 2655
Joined: Wed Aug 13, 2003 10:45 am
Location: Bothell, WA
Contact:
Contact Yukonart

Post by Yukonart »

Looks pretty damn good, Steve . . . and looks to be more functional as well. ;)
"Power is NOTHING without control"
1994 & 2005 Legacy GT Wagons
Top
LaureltheQueen
Spelling Nazi
Spelling Nazi
Posts: 4644
Joined: Fri Aug 29, 2003 7:14 am
Location: Lynnwood, WA
Contact:
Contact LaureltheQueen

Post by LaureltheQueen »

The craft looks good, but l personally think big scoops terribly damage the lines of the car. Your bodywork looks good, though!
Laurel Tuning Stage 15
92 Touring Wagon 5MT 16G
[quote="NICO I WRX U"]the streets are my track[/quote]
Top
The Scooby
Second Gear
Posts: 492
Joined: Fri Jul 23, 2004 7:32 am
Location: Seattle, Washington

Post by The Scooby »

looks good but that is off of an inpreza outback sport, this is what happends when you worked at a subaru wrecking yard. :)
1999 Impreza Outback Sport w/ MY02 WRX complete swap


1986 GL wagon
EJ'ed and Lifted
Top
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Post by Splinter »

Nope...

Its exactly the same style as the 98 RS scoop, but about 3/4" taller.

1998 WRX STi:

Image
98 Steel Widebody RSTi-RA Superbeast
Top
Adam West
Fourth Gear
Posts: 1322
Joined: Wed Mar 09, 2005 10:04 pm
Location: Seattle, WA
Contact:
Contact Adam West

Post by Adam West »

Nice! I have one like that 98 RS down in the basement I got for $20 bucks. I like yours but think the RS style is a little less upright and will look slightly better from the side. Can't beat that price and the DIY. I'm going to pay to have it done tho...brave man you are...Excellent effort!
93SS 5MT White, TD05-16G, TMIC, 3"Turboback, Magnaflow, Alu Rad, H&R Sports, AGX struts, F/R STBs, Whiteline Sways, ALK+Endlinks, Odyssey 925, AC delete, Evo8 Recaros, Sparco 4p, 3.9 LSD, Hellas+air horns, IPD short throw, 99RSrims, s03's
Top
Adam West
Fourth Gear
Posts: 1322
Joined: Wed Mar 09, 2005 10:04 pm
Location: Seattle, WA
Contact:
Contact Adam West

Post by Adam West »

Nice! I have one like that 98 RS down in the basement I got for $20 bucks. I like yours but think the RS style is a little less upright and will look slightly better from the side. Can't beat that price and the DIY. I'm going to pay to have it done tho...brave man you are...Excellent effort!
93SS 5MT White, TD05-16G, TMIC, 3"Turboback, Magnaflow, Alu Rad, H&R Sports, AGX struts, F/R STBs, Whiteline Sways, ALK+Endlinks, Odyssey 925, AC delete, Evo8 Recaros, Sparco 4p, 3.9 LSD, Hellas+air horns, IPD short throw, 99RSrims, s03's
Top
IronMonkeyL255
Fourth Gear
Posts: 1902
Joined: Sat Aug 09, 2003 5:02 pm
Location: Woodruff, SC

Post by IronMonkeyL255 »

That makes me want to sell my WRX scoop and get an RS scoop......
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.

That being said, everything I post is accurate to the best of my knowledge.

Rio Red '91 Legacy SS
Top
Adam West
Fourth Gear
Posts: 1322
Joined: Wed Mar 09, 2005 10:04 pm
Location: Seattle, WA
Contact:
Contact Adam West

Post by Adam West »

I think this is first generation USDM STI scoop. I remember people on that other board were like "WTF ?"about how upright the scoop looked. Heard something to the effect that Subaru rushed the design off a model and the designer was pissed because it was just a tester shape and not what he wanted to have go into production. The very next iteration/MY I think they fixed. Maybe someone can back me up with some facts since I was only half paying attention? STi's don't really get my attention when there are much cooler cars readily available for 1000's less $$...

Still this scoop should grab the air like a motha. Good mod!
93SS 5MT White, TD05-16G, TMIC, 3"Turboback, Magnaflow, Alu Rad, H&R Sports, AGX struts, F/R STBs, Whiteline Sways, ALK+Endlinks, Odyssey 925, AC delete, Evo8 Recaros, Sparco 4p, 3.9 LSD, Hellas+air horns, IPD short throw, 99RSrims, s03's
Top
scottzg
Knowledgeable
Knowledgeable
Posts: 2278
Joined: Tue Jan 28, 2003 8:19 am
Location: Saint Joe, CA - Redlands, CA

Post by scottzg »

the scoop makes the hood flex a lot at speed. I hope it doesnt crack up your bondo. i would run it for a few weeks to see if its gonna fly before i painted it.
[url=http://www.thawa.net/gallery/albums/album108/DSCF0330.jpg]90 legacy of awesomeness[/url]
Top
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Post by Splinter »

The bondo is just there for smoothness, the main structure of it is the longhair fibreglass
98 Steel Widebody RSTi-RA Superbeast
Top
AWD_addict
Fifth Gear
Posts: 2774
Joined: Sun Nov 23, 2003 12:22 am
Location: Western WA!

Post by AWD_addict »

Looks good, not overly large like the newer STi scoops would.
90 L+ wgn
Top
LaureltheQueen
Spelling Nazi
Spelling Nazi
Posts: 4644
Joined: Fri Aug 29, 2003 7:14 am
Location: Lynnwood, WA
Contact:
Contact LaureltheQueen

Post by LaureltheQueen »

I remember kelly made a scoop and it flew off at 70. Good luck
Laurel Tuning Stage 15
92 Touring Wagon 5MT 16G
[quote="NICO I WRX U"]the streets are my track[/quote]
Top
Post Reply

Return to “Body, Chassis and Interior”