legacycentral bbs

Posted: **Wed Oct 16, 2002 11:06 pm**

I heard whiteline makes the best suspension parts for Subarus, but I can only find an anti-lift kit for our car from them. I also found a swaybar on ebay, but it's not for the US spec. Are there any parts, for, say an impreza, that I could make work with some modifications.

Posted: **Thu Oct 17, 2002 12:30 am**

You should visit the whiteline sight, find the pdf with the product listing, write down the part number then find a whiteline distributor and order the part.

Any real whiteline distributor can get any of the parts listed. Usually they can have them shipped directly to you from whiteline.

Posted: **Fri Oct 18, 2002 1:53 am**

The problem isn't that I can't find anything for our cars, it's that they don't make anything for them other than the anti-lift kit.

Posted: **Fri Oct 18, 2002 3:00 am**

You must not be looking in the right place....

I have:

Anti Lift
Front strut brace
Front 22mm sway bar
Front 22m hardened bushings
front sway bar links

Rear 18-20-22 sway bar
Rear 20mm hardened bushings
Rear HD sway bar mounts
Rear sway bar links

All from whiteline.........

Posted: **Fri Oct 18, 2002 1:45 pm**

they make 30mm drop springs too!

Posted: **Fri Oct 18, 2002 3:57 pm**

Look around the popular Subaru performance parts dealers online. Here are some that list other Whiteline parts for Legacies online.

http://www.mrtrally.com
http://home.att.net/~teaguesauto/index.htm

If the problem is that you see parts listed for newer generation Legacies only, instead of our BC-BF's, ask these for the authoritative answer. Many parts transfer and I guarantee someone on this list has tried it

Sam
90 Legacy L Wagon awd

Posted: **Fri Oct 18, 2002 4:03 pm**

Oops, typo.

I meant to say "ask these forums" for the info

Sam

Posted: **Fri Oct 18, 2002 6:44 pm**

Oh yeah, I have whiteline springs on the front.

Posted: **Fri Oct 18, 2002 11:38 pm**

Here's is Whiteline's application guide for springs

http://www.whiteline.com.au/docs/catalo ... D3_app.PDF

Here's their full catalog (warning 1.44mb) http://www.whiteline.com.au/docs/catalo ... 3_full.PDF

As far as suspension stuff goes....pretty much anything you can put on an impreza will work in some form on our legacies......there's a couple tid bits and complications depending on your particular year....but should work.

Posted: **Sat Oct 19, 2002 2:15 am**

I just installed a set of sti (new age wrx) struts and springs w/ sti top hats.
so ( I would think) any impreza suspension part should work

Posted: **Sat Oct 19, 2002 5:13 pm**

i just got rear endlinks in the mail for $41 shipped. i would like to install them tomorrow.

Posted: **Sat Oct 19, 2002 6:06 pm**

Although, I've heard one impreza part that doesn't transfer to the Legacy is the rear sway bar, because Legacies have a bigger bulge for the spare tire or something like that.

Posted: **Sat Oct 19, 2002 7:45 pm**

rear anti-sway bar would be something I would recommend on getting a car specific part.

Posted: **Mon Oct 21, 2002 6:33 pm**

Thats right. The impreza bar has only 8 bends while the bc-bf bar has close to 20!

Posted: **Mon May 05, 2003 12:58 pm**

Would like to drop a good word in for PDM-RACING

I have ordered all of my whiteling gear from them, excellent prices and customer service.

MK

Posted: **Mon May 05, 2003 1:38 pm**

My beef with PDM is they don't want any phone contact. I don't like that.

I can usually find comparable prices else where that don't mind phone contact....so I go that route......but that's my only beef with them......

legacycentral bbs

Whiteline Products

Whiteline Products