newb question: coffee cup mod

Snorkus, filters, throttle bodies and intake manifolds.

Moderators: Helpinators, Moderators

Post Reply
superstock2
In Neutral
Posts: 10
Joined: Mon Mar 13, 2006 9:33 am
Location: Montana

newb question: coffee cup mod

Post by superstock2 »

so i just picked up an aegian blue touring wagon... i've been bit by the tuning bug and want to unrestrict the intake... i have a perfect coffee cup but don't have the rest of the parts list... like fitting sizes and what not... anyway if anyone can help it would be greatly appreciated... and yeah i searched but couldn't find much.
93' Legacy Sedan w/ Full SS swa
Top
know1
Second Gear
Posts: 520
Joined: Thu Jan 18, 2007 9:28 am
Location: Vancouver, Canada

Post by know1 »

+1 for the colour
1994 Crimson Pearl SS [ td04, 06 fxt tmic,3" catless dp -> apex GT spec exhaust, EDM Tails ]
Top
Legacy777
Site Admin
Site Admin
Posts: 27889
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Contact Legacy777

Post by Legacy777 »

Your best bet would be to go to the hardware store with the hoses that need to hook up to the fittings, and just test-fit them.

Obviously someone will have to drive :)
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Top
New92
Third Gear
Posts: 573
Joined: Wed Mar 01, 2006 5:41 pm
Location: Georgia

Post by New92 »

Where'd you find your mug? Still havnt found one with a good fit on both ends.
1992 SS 5MT
She's growing faster in her old age!
Top
Splinter
Knowledgeable
Knowledgeable
Posts: 3058
Joined: Tue Aug 02, 2005 11:12 pm
Location: Victoria, BC

Post by Splinter »

I went to an exhaust shop and got them to expand a piece of steel piping to the right size
98 Steel Widebody RSTi-RA Superbeast
Top
Adam West
Fourth Gear
Posts: 1322
Joined: Wed Mar 09, 2005 10:04 pm
Location: Seattle, WA
Contact:
Contact Adam West

Post by Adam West »

I'm sure that information is here somewhere...
93SS 5MT White, TD05-16G, TMIC, 3"Turboback, Magnaflow, Alu Rad, H&R Sports, AGX struts, F/R STBs, Whiteline Sways, ALK+Endlinks, Odyssey 925, AC delete, Evo8 Recaros, Sparco 4p, 3.9 LSD, Hellas+air horns, IPD short throw, 99RSrims, s03's
Top
New92
Third Gear
Posts: 573
Joined: Wed Mar 01, 2006 5:41 pm
Location: Georgia

Post by New92 »

Splinter wrote:I went to an exhaust shop and got them to expand a piece of steel piping to the right size
Thats my next approach.
1992 SS 5MT
She's growing faster in her old age!
Top
New92
Third Gear
Posts: 573
Joined: Wed Mar 01, 2006 5:41 pm
Location: Georgia

Post by New92 »

Adam West wrote:I'm sure that information is here somewhere...
Yes it is...unfortunately the "phantom" 100% spill proof mug from target is no longer available (that I can find) and Ive cut up several mugs in the process of fabricating the right piece. (the wife thinks im nuts) I was just surprised that someone actually found one in a store and figured that others who may look at this thread could benefit from the knowledge and avoid that hassle I went thru.
1992 SS 5MT
She's growing faster in her old age!
Top
superstock2
In Neutral
Posts: 10
Joined: Mon Mar 13, 2006 9:33 am
Location: Montana

Post by superstock2 »

New92 wrote:Where'd you find your mug? Still havnt found one with a good fit on both ends.
my pops had it so i got the five finger discount on it ;) he's still looking for it.
93' Legacy Sedan w/ Full SS swa
Top
Post Reply

Return to “Intake”