legacycentral bbs

Posted: **Mon Jun 04, 2007 3:20 am**

Hey guys...Im a total newbie to this site and a newb to subarus too....now with that said, a few weeks ago I had both ball joints and the drivers side axle replaced...then the passenger side started knocking too so I decided to d that myself. It was pretty straight forward and much cheaper...but the problem im running into is that it still knocks (much less tho) and now kinda vibrates on hard acceleration too! So before I rip it apart I wanted to know if I could get some help and see if u guys ever ran into this problem!
Thanks....Steven

'90 legacy FWD Jap. ej22

Posted: **Mon Jun 04, 2007 6:13 pm**

Could be the cv axles.

have you tried jacking the car up and tried moving the wheel to see if there's any free play?

Posted: **Tue Jun 05, 2007 2:39 am**

Not yet but I will when I get some free time....

Posted: **Tue Jun 05, 2007 7:38 pm**

Where did you get the axles from?

legacycentral bbs

Two New Axles and still knocking...Help!

Two New Axles and still knocking...Help!