Hey guys...Im a total newbie to this site and a newb to subarus too....now with that said, a few weeks ago I had both ball joints and the drivers side axle replaced...then the passenger side started knocking too so I decided to d that myself. It was pretty straight forward and much cheaper...but the problem im running into is that it still knocks (much less tho) and now kinda vibrates on hard acceleration too! So before I rip it apart I wanted to know if I could get some help and see if u guys ever ran into this problem!
Thanks....Steven
'90 legacy FWD Jap. ej22
Two New Axles and still knocking...Help!
Moderators: Helpinators, Moderators
-
FilmMaster
- In Neutral
- Posts: 3
- Joined: Sat May 26, 2007 12:05 am
- Location: Vancouver, WA
Could be the cv axles.
have you tried jacking the car up and tried moving the wheel to see if there's any free play?
have you tried jacking the car up and tried moving the wheel to see if there's any free play?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
FilmMaster
- In Neutral
- Posts: 3
- Joined: Sat May 26, 2007 12:05 am
- Location: Vancouver, WA
-
entirelyturbo
- quasi-mod-o
- Posts: 6000
- Joined: Thu Dec 05, 2002 7:06 pm
- Location: Tampa, FL