HELP---Can't get the 5MT out----

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
forsinapu
In Neutral
Posts: 13
Joined: Wed Sep 19, 2007 8:03 am
Location: Co Springs, CO
Contact:
Contact forsinapu

HELP---Can't get the 5MT out----

Post by forsinapu »

I'm putting a new clutch/flywheel in a 91 SS and everything on the transmission is unbolted and it's loose with about a 3/4" gap all the way around between the tranny and engine. It's wiggling around looking like it's ready to just pop off, but nothing. It will move out more with some good yanking and a pry bar and then just suck back in and stay at the 3/4" spot.

Any ideas??

Thanks, Jason
Jason

91 Rio Red SS--She's wants to be Rally Crosser
Top
IronMonkeyL255
Fourth Gear
Posts: 1902
Joined: Sat Aug 09, 2003 5:02 pm
Location: Woodruff, SC

Post by IronMonkeyL255 »

Did you remove the clutch fork pivot?
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.

That being said, everything I post is accurate to the best of my knowledge.

Rio Red '91 Legacy SS
Top
stipro
Third Gear
Posts: 699
Joined: Mon Apr 26, 2004 4:20 am
Location: Calgary, Canada

Post by stipro »

Here is a link on how to do it
http://bbs.legacycentral.org/viewtopic. ... ing+tranny
1994 ABM Sport Sedan-Not stock
1990 L series/turbo-Rally project
Top
forsinapu
In Neutral
Posts: 13
Joined: Wed Sep 19, 2007 8:03 am
Location: Co Springs, CO
Contact:
Contact forsinapu

THANKS!

Post by forsinapu »

Holy crap, thanks! Guess I'm not the only one. I tried to search for it but wasn't really sure what to search for--I'm an ass.
Top
Post Reply

Return to “Drivetrain”