Page 1 of 1
Center Diff ID - without tearing apart the tranny?
Posted: Mon Jan 07, 2008 4:14 pm
by BXSS
I have a JDM WRX tranny that has an LSD Front diff, & after looking @ it I'm thinking the center diff may have been swapped out too.
Will taking off the gold cover on top of the tranny (4 x 12 or 14mm bolts) allow me to peak inside the center diff area safely?
Posted: Mon Jan 07, 2008 6:54 pm
by IronMonkeyL255
I don't think it would.
I have a tranny torn apart if you want me to take a look.
Just let me know exactly what dimension you want and I'll go get it.
Posted: Mon Jan 07, 2008 10:14 pm
by IronMonkeyL255
Well, if you remove the plate you could probably kinda see the center diff, but there's a bit of stuff in the way.
I took some measurements of my center diff, then realized I only took OD measurements instead of ID..... D'oh.
Posted: Tue Jan 08, 2008 2:15 pm
by BXSS
Thanks for the reply.
I'm just hoping to be able to see the general appearance & brand name (or lack there of) on the center diff, I don't really need any dimensions.