Page 1 of 1
What injectors to use, and where to get?
Posted: Thu Apr 10, 2008 3:29 am
by shtbxr22
94 T-wag. MBC, FCD, I/C, Walbro 255. what injectors to be using if going up to 20 psi +/-? also where to get? looking for drop in injectors. ( also what Walbro to use? STI?)
Posted: Thu Apr 10, 2008 3:41 am
by 555BCTurbo
Some greytop 440 injectors should fit the bill well...but they run ass rich if you don't have a piggyback...
Oh, and I hope not 20psi on the stock turbo
Posted: Thu Apr 10, 2008 3:50 am
by shtbxr22
just looking to the future my friend.
Posted: Thu Apr 10, 2008 3:50 am
by douglas vincent
If you are piggybacking, I prefer 550s, then you are able to tune down, versus up.
Posted: Thu Apr 10, 2008 11:14 am
by shtbxr22
how about the fuel pump? STI HP255?
Posted: Thu Apr 10, 2008 5:20 pm
by 93forestpearl
If you get some 92-94 NA rails, you can use SR20 injectors. You just have to change the clips. I'm running 650's and am looking at some 1000cc units.
Posted: Thu Apr 10, 2008 10:00 pm
by shtbxr22
how about the fuel pump???
Posted: Thu Apr 10, 2008 10:36 pm
by asc_up
Yes. Get Walbro 255LPH for WRX/STi.
Posted: Thu Apr 10, 2008 11:16 pm
by shtbxr22
thank you.
