Page 1 of 1

Rear sway bar mount right side

Posted: Mon Nov 24, 2008 3:31 am
by drsevy
the mount behind the rear wheel has rusted and broken off (is justa hangin) anybody have any experience repairing these ? ;-)

Posted: Mon Nov 24, 2008 6:51 pm
by Legacy777
Hopefully it's just the mount. If so, you can just buy another one and put it in. There are some heavier duty aftermarket ones if you so choose.

As for replacement. There are two bolts holding it to the chassis. Hopefully the chassis is alright. I'd suggest soaking the bolts in penetrating oil to aid in removal.

Posted: Mon Nov 24, 2008 8:10 pm
by Threshld1
Ewww i hope its just your mount bracket as well. I just pulled these brackets off my 93 and both the frontmost bolts sheared right off. Good thing the chassis is scrap otherwise i would be extra pissed. Exp. since the right side front bolt is dead middle under the fuel filler. Making it much more of a whore to drill out. Lots of penetrate and work the bolt in and out if you can get it to turn.
Best of luck!