legacycentral bbs

These are readily available, and seem close to the correct width:




Does anyone have access to a later model Forester to measure the width of the top of the tailgate where this would mount?

Not expecting a bolt-on, but if it's close, I'd like to try, like the 2nd gen Leg wagon spoilers can be fit to the BF with a little work.

Man. Did anyone ever try this?

i'll measure this and see I'm parting out an 04 fxt

diesel devil wrote:i'll measure this and see I'm parting out an 04 fxt

What's the verdict?

i'll get the meaurements a bit later today

ok it will fit only if you remove the mounting studs.
it looks like it will fit very flush to the hatch on my 93 TW. the sides should also fit flush too
it will however cover the top trim edge of the rear glass but its not an issue

the dimensions
side to side 46.25"
center on the top edge of hatch to center of outer edge of the spoiler 11.5"
side height from bottom edge to top 5.5"

Hey, if you already have it off the Forester would you mind
holding it up to the car and taking a picture? I'd be interested
in seeing how it looks on there.

its not off the forester i just measured it with a profiler and held that against my wagon hatch
i'll pull it off and take some pics this weekend I'm kinda busy with work

Ah, gotcha. No rush, man. I know what's
it's like to have to work all the time. Appreciate it!

i'm parting out my forester now and i'll test fit the spoiler

ok its about 2" too wide to fit the top of the wagon liftgate

I'm on the fence about cutting out the extra width to make it fit but i think i should do it just to be the first

sorry i didn't take a pic i was busy helping out with a friend who drives a JDM 94 legacy rs sedan thats having some issues

No problem dude. If you end up cutting it you could make
it work and with a bit of sanding and repainting it could be
freakin sweet

I'm preparing to make it fit the next time I work on the car

Nice. Make sure to post pictures up when you get it done!

I'm going to cut and test fit the forester spoiler this week weather permitting
as I measured it its about 2" too wide and the profile side needs to be trimmed to match the wagon hatch

here are the first pics from my fitment test

added pics of the test fit after i cut 2" out of the center

Will that hit your basket up there? Looks good
so far dude

Now two things:

Where did you get that basket and how much was it?
What kind of rear wiper arm do you have?

i can move the basket forward lol

I have the newer 04+ style plastic wiper arm and I mounted the rear sprayer at the top of the hatch see it in the pics.
As for the roof basket its aluminum and weighs about 20lbs I got it at princess auto its the canadian version of harbor frieght. I paid $150+taxes and its very well made easy to assemble too.

i had to cut like 4" out of my RX300 spoiler to make that fit... make sure when you glue it back together you use metal plates on the inside or it will crack

diesel devil wrote:I have the newer 04+ style plastic wiper arm and I mounted the rear sprayer at the top of the hatch see it in the pics.
As for the roof basket its aluminum and weighs about 20lbs I got it at princess auto its the canadian version of harbor frieght. I paid $150+taxes and its very well made easy to assemble too.

Oh, I see the sprayer up there. Man, that's cool.
And the basket...not a bad deal I'm gonna have
to look around for one of those.

diesel devil wrote:...princess auto its the canadian version of harbor frieght...

Princess auto.....I love it.

as funny as the name is go check it out www.princessauto.com its a great place to shop

Yeah it looks a lot like Harbor Freight and Northern Tool here in the states, and I can spend some time browsing/shopping there

it needs more work but looks pretty decent

Looks like it's meant to be there. Not sure what it's doing functionally with that badass roof rack in front of it, but it looks good.

Looks sick although the paint looks terrible.