Page 1 of 1
FS: V2 STI intercooler and hood scoop
Posted: Fri Apr 24, 2009 10:36 pm
by dayrunner22
Like it says, a v2 slant-mount TMIC I need to get rid of. Not currently in my wagon but I included a pic for reference. I also have a matching scoop with shroud that I can include as well. I would like to get $200 for the lot, or whatever anyone is willing to give me for it.
Posted: Sat Apr 25, 2009 1:18 am
by Matt Monson
Can you post a picture of the backside since that's clearly not a factory inlet?
Posted: Sat Apr 25, 2009 3:33 am
by PhyrraM
Matt Monson wrote:Can you post a picture of the backside since that's clearly not a factory inlet?
That looks exactly like mine does, inlet included. Mine has a "motorsports use only" sticker on it. I figure it's either a really early STI, or possibly a "catalog" item. I can PM you pics Matt, if your doing research.
Sorry for the O.T.,........... bump! It's a much better flowing inlet than a standard "black slanty".
Posted: Sat Apr 25, 2009 9:55 am
by dayrunner22
PhyrraM wrote:Matt Monson wrote:Can you post a picture of the backside since that's clearly not a factory inlet?
That looks exactly like mine does, inlet included. Mine has a "motorsports use only" sticker on it. I figure it's either a really early STI, or possibly a "catalog" item. I can PM you pics Matt, if your doing research.
Sorry for the O.T.,........... bump! It's a much better flowing inlet than a standard "black slanty".
That's right PhyrraM, it's off a version 2 JDM STI that actually came out of a '96 donor car.
Matt, I can also send you pics if you are interested.
Posted: Sat Apr 25, 2009 2:12 pm
by Matt Monson
Can you just post pictures? Then if I don't buy it they'll already be up for the next guy.
Posted: Sun Apr 26, 2009 12:05 am
by dayrunner22
Matt Monson wrote:Can you just post pictures? Then if I don't buy it they'll already be up for the next guy.
Sorry I haven't posted pics yet - I got busy in the yard all day and now I've got to go to work for a late shift. I will get them up tomorrow morning.
other pics
Posted: Sun Apr 26, 2009 8:22 pm
by dayrunner22
Posted: Mon Apr 27, 2009 3:37 am
by greg donovan
is that a AVO pipe on there?
what engine is that hooked up to in your car?
Posted: Mon Apr 27, 2009 4:09 am
by dayrunner22
greg donovan wrote:is that a AVO pipe on there?
what engine is that hooked up to in your car?
Greg,
To my knowledge it's not an avo pipe, but I do know it's the JDM pipe that was on the car when the swap was done.
The engine is a full ver. 2 STI - engine, tranny, and rear diff. I got into a fender-bender and took the opportunity to run a FMIC
Posted: Mon Apr 27, 2009 3:48 pm
by Matt Monson
Cool,
Thanks for the pictures. That's a factory aluminum inlet pipe with some sort of aftermarket silicon elbow replacing the plastic elbow. Let me know if you decide to move on that price. That's more than I am willing to pay, especially since all I actually need is the pipe.
Posted: Mon May 04, 2009 5:06 pm
by BXSS
My '95 STi Ra swap had this EXACT same Silver TMIC/elbow/connector.
I think this is a stock STi set-up as three of us have/had the same TMIC/elbow/silicone connector (PharraM's, this one, & mine).
The cast elbow is actually very nicely machined internally from the factory (has a taper to match smallish inlet to the larger diameter elbow body).
I sold mine on Rs25 - ? posting up there.
Posted: Mon May 04, 2009 11:06 pm
by dayrunner22
BXSS wrote:My '95 STi Ra swap had this EXACT same Silver TMIC/elbow/connector.
I think this is a stock STi set-up as three of us have/had the same TMIC/elbow/silicone connector (PharraM's, this one, & mine).
The cast elbow is actually very nicely machined internally from the factory (has a taper to match smallish inlet to the larger diameter elbow body).
I sold mine on Rs25 - ? posting up there.
You are right BXSS this is the stock intercooler off a '96 V2 STI. I hadn't thought of listing it on Rs25 - I will have to check that out.
Posted: Mon Jun 01, 2009 3:45 am
by dayrunner22
Bump for updates - someone in the Tacoma/Seattle area give me a decent offer and come and get this. I'm moving and need to clear out some ish.
Also, I have the following parts as well:
'90 LS bumper skin - this was resprayed a few years ago but has a few inch abrasion on the right corner from a run-in with a post
'90 bumper skin and beam - beat up but complete
'90 left fender - same as above
Make me an offer and come get this shit.
Posted: Mon Jun 01, 2009 10:55 am
by asc_up
I have an 06/07 USDM WRX TMIC, would this be an upgrade? As in, is it's cooling efficiency higher than the USDM WRX?
