Page 1 of 1
4eat transfer clutch replacement writeup?
Posted: Mon Oct 12, 2009 7:47 pm
by magicmike
Is there one? I've heard some funny noises in the snow from my 4 eat when boosting hard. I think this may be on its way out.
I'm talking about using a kit like this
http://www.levelten.com/Level_10_PTS_Su ... -15000.htm
to replace these:
Posted: Mon Oct 12, 2009 9:45 pm
by magicmike
Found this while browsing the interweb. Saved a file for ref.
http://www.subaru-faq.ru/pdf/transmission/4eat.pdf
Posted: Mon Oct 12, 2009 11:05 pm
by tturnpaw
simple fix...remove clutches and weld it in the basket. Theres enough give in the front diff and rear to keep any serious problem from arising. Then you will have peace of mind in knowing theres a continuous 50/50 going out.
Posted: Mon Oct 12, 2009 11:15 pm
by tturnpaw
Posted: Tue Oct 13, 2009 5:16 am
by 93forestpearl
You won't break anything, but it is quite annoying around corners. Steering is much harder around corners as well.
Posted: Tue Oct 13, 2009 2:55 pm
by WhiteLegacyGuy
This is all for a 5-Speed the 4eat is wildly different.
Posted: Tue Oct 13, 2009 4:38 pm
by magicmike
Thanks for the input guys. However, I'm not looking to turn my car into a drift machine. I already have a rwd car that I can barely drive in the rain.
Like I stated above. I'm looking for some material to be able to do the service myself on my 4eat.
Posted: Tue Oct 13, 2009 5:06 pm
by wtdash
USMB info:
HERE and
HERE help?
Posted: Tue Oct 13, 2009 5:58 pm
by magicmike
wtdash wrote:USMB info:
HERE and
HERE help?
ok so wait a minute... I don't have torque bind. I have a strange noise and rear wheel slippage at high boost levels only in the snow. I though it was the clutch pack.
Hum, Maybe I have a problem with sol C?