Crank no start please help
Moderators: Helpinators, Moderators
Crank no start please help
Hey guys so I been having this problem for a couple of weeks on my 91 turbo legacy with a ej20g swap. I decided to replace the dash and fender harness because my old one was hacked up. Anyways before the install it ran alright and fired up and now after I installed this new harness it cranks but doesn't start. When I got this new harness the crank angle sensor wire was cut so I ended up taking the wire from my old harness and butt connected them to the new one. I think I might of got the wires mixed up and now it will not start. Can anyone give me any pointers on how to get this thing running again. Maybe a picture of the cas wires, and how there ran into the sensors.
2005 STi (500WHP with "SlowSTi" as the license plate lol (Weekend Warrior)
1991 Legacy ss JDM EJ20G swap with STi goodies (DD)
1991 Legacy ss JDM EJ20G swap with STi goodies (DD)
Re: Crank no start please help
What wires did you modify? I would start there and try to undo what you did that got the wires mixed up.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- In Neutral
- Posts: 4
- Joined: Tue Apr 12, 2011 8:26 pm
Re: Crank no start please help
in my search to fix my car. i think i read where the crank and cam sensor wires cant be butt connected. they have to be solded or not cut at all. i may be wrong. or maybe that just had to do with the cam sensor wires.