Snorkus, filters, throttle bodies and intake manifolds.
Moderators: Helpinators , Moderators
SubaruNation
Fifth Gear
Posts: 3526 Joined: Wed Jul 18, 2007 5:07 pm
Location: Whammy!
Post
by SubaruNation » Thu Apr 14, 2011 5:57 am
Does anyone have access to a PCV system diagram or mapout? I've searched the site and can't find anything
I understand i am running a different motor, but as long as im hitting all the holes that would pull the gunk from the block it shouldn't matter.
ideas?
Zach - Legacy
Franken sti n
93forestpearl wrote: Keep up the good work. You'll never know what you are capable of unless you push yourself.
BSOD2600
Fourth Gear
Posts: 1636 Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA
Post
by BSOD2600 » Thu Apr 14, 2011 4:51 pm
Was there something missing from the forum sticky and/or the image in that post?
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
mike-tracy
Moderator
Posts: 5000 Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa
Post
by mike-tracy » Thu Apr 14, 2011 6:54 pm
^^Yeah, like how to route the EJ20G's PCV in a somewhat stock location
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑ Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.
SubaruNation
Fifth Gear
Posts: 3526 Joined: Wed Jul 18, 2007 5:07 pm
Location: Whammy!
Post
by SubaruNation » Fri Apr 15, 2011 6:43 am
Yeah exactly, I think I have it all set now.. but basically I have a reed single line that connects the block brethers and the pcv and the pre turbo intake. Apologies for the run on.
Zach - Legacy
Franken sti n
93forestpearl wrote: Keep up the good work. You'll never know what you are capable of unless you push yourself.
SubaruNation
Fifth Gear
Posts: 3526 Joined: Wed Jul 18, 2007 5:07 pm
Location: Whammy!
Post
by SubaruNation » Fri Apr 15, 2011 6:44 am
Teed *
Zach - Legacy
Franken sti n
93forestpearl wrote: Keep up the good work. You'll never know what you are capable of unless you push yourself.