Page 1 of 1
will this timing belt kit work?
Posted: Sun Jun 19, 2011 4:06 pm
by lucas
Re: will this work?
Posted: Sun Jun 19, 2011 5:40 pm
by cj91legss
it should work fine
Re: will this work?
Posted: Sun Jun 19, 2011 11:56 pm
by lucas
is it missing anything?
Re: will this work?
Posted: Mon Jun 20, 2011 5:32 am
by Rubasu
it looks like it for a N/A with the water pump but all the bearing and belt will work.
Re: will this work?
Posted: Mon Jun 20, 2011 7:27 am
by lucas
whats different about the water pump for the turbo cars
Re: will this work?
Posted: Mon Jun 20, 2011 5:31 pm
by Legacy777
The turbo pump has some additional fittings and the housing for the thermostat bolts to the side instead of the bottom of the pump.
From the picture that is definitely not a turbo pump. Here's pics of a turbo pump:
http://www.main.experiencetherave.com/s ... P_4741.JPG
http://www.main.experiencetherave.com/s ... P_4742.JPG
http://www.main.experiencetherave.com/s ... P_4743.JPG
http://www.main.experiencetherave.com/s ... P_4988.JPG
Re: will this work?
Posted: Thu Jun 23, 2011 4:07 am
by lucas
and that pump will work with all years legacy sport sedans?
Re: will this work?
Posted: Thu Jun 23, 2011 5:39 pm
by Legacy777
The pump I have and that is in the picture has the extra port for the oil cooler. If you do not have the oil cooler, there's a different part # for that pump. Or you can use a nipple and clamp to cap off the extra port for the oil cooler.
Re: will this work?
Posted: Fri Jun 24, 2011 5:29 am
by lucas
how do i clamp that end off? solder it?
Re: will this work?
Posted: Fri Jun 24, 2011 5:29 pm
by wtdash
You need the '92-94 SS/TW EJ22T pump for your '93.
The '91 used the pump w/the extra port to the oil cooler - it's the same pump used on the WRX '02-04 (double-check).
Just get the correct pump for your year so you don't have to mess w/it. The pumps are about the same price, regardless of year.
You should also replace the thermostat and its gasket.
I can personally recommend the
'TheImportexperts' on Ebay.
Plz update your Title, such as 'Will this Timing belt kit work'?
GL,
Td
Re: will this work?
Posted: Fri Jun 24, 2011 5:42 pm
by Legacy777
As Todd mentioned, you're better off getting the correct pump, and what I was referring to was simply a little rubber cap (made to withstand pressure) to go over that port with a clamp.
Re: will this timing belt kit work?
Posted: Fri Jun 24, 2011 7:17 pm
by lucas
I figure the right pump would be best as well, I was just curious how you'd cap it considering the pressure
Re: will this timing belt kit work?
Posted: Mon Jun 27, 2011 5:15 pm
by Legacy777
It's on the suction side of the pump, so it's lower pressure.
