legacycentral bbs

To be clear, this is not a car part-out thread, however an entire subie could possibly be built from the parts available. Its also not a spring cleaning thread as its obviously too late this year and just slightly too early to be an early-spring-cleaning for next year sale. That being said, I just want this stuff gone. No reasonable offer refused! Many parts available for the price of shipping! If its not gone by next weekend, its off to the dump! All parts are in known good condition unless otherwise noted, I don't keep the bad stuff.
So here goes:
Intake manifold 3 w/ throttle body, 2 w/ harness, 1 w/ IAC sold
Radiator fans (pair), 2 available
N/A heads, 1 pair
Oil pump, stock, 2
Coolant crossover tube, 2 n/a, 1 turbo
IAC, 3 sold
Various cam and crank timing pulleys for EJ22 and EJ25 (even one AVLS cam pulley, don't ask)
Harmonic balancer/crank pulley, 3
Timing tensioners, a few old style, one new style w/ mount bracket
Engine mounts, 1pr. n/a, 1pr. turbo
Various timing covers
Shifter assy., 2 1 sold
Various swaybars, all stock, from stock turbo Leg to WRX, front and rear
Swaybar bushings, a few stockers, 1pr. COBB (new)
Tail lights w/ center section sold, post-facelift
Wagon tail light, right side
Headlight, pre-facelift, right side
Marker/corner light, post-facelift, right side
Sun visors, light grey
Sun visor, light blue, right side
Various center console/radio mount stuff, .5 DIN filler panel sold
ECU, 2 n/a, 1 turbo
V.2 slanty TMIC
Also available but not pictured, BNIB stock replacement, metal end tank, radiator for n/a Legacy. Paid $100 a year ago and didn't end up needing it. Make offer.




Pics enlarged for clarity and prosperity. If you see something you want thats not listed, its available, make an offer.

How much for the Intake Manifold with harness and IAC, the .5 DIN filler, and one shifter assembly??? shipped to 20707??? Or how much for each of those alone? PM me, im deff interested.

PS, are those two 22t longblocks you have in the first and second pictures???

Enough rear sway bar parts for me to add one to my car? If so how much along with the sedan tail lights? I'll be in the area Friday, going to the Puyallup Fair so shipping wouldn't be needed.

Stephen, what do you want for the post facelift garnish?

Willing to sell one of those coilpacks?

Who much for the IAC Shipped to 18322

PMs sent.

I'm interested in the knuckle, water temp sensor (for the dash gauge), and Cobb bushings. Please PM info on the knuckle and bushings and price shipped to 85268 in Arizona. Thanks! If you could also tell me the price shipped of the ss intake w/IAC (if it's still available). Thanks!

I know there's a couple people in front of me, but I am interested and can pick up the following parts:

Post-facelift center garnish
Turbo Throttlebody with TPS (or an entire intake manifold if you don't want to seperate the TB)
Maybe that 45 degree shiny intake piece too?

I can stop by on my way south this weekend. I drive through Tacoma all the time.

If the .5 DIN filler is still available, I'm interested in that.

slanty TMIC shipped to 84405 please let me know! thanks

Wagon tail light shipped to 11731

I'm interested in an Idle Air Control Valve and a coil pack - provided they're both working, let me know what you want shipped to 18102
Thanks!

More PMs sent.

Also interested in an n/a IAC shipped to 86406

How much for the oil pumps and mileage please. 33467

List updated.

PM me please on the headlight/wiper/lights stalk assembly. I messed mine up in the rally car this weekend.

Shipped to 63146.

Thanks!

Payment has been sent!!!

is the turbo ECU meant for an auto or standard car. And does it even matter?

The harness 'tells' the ECU what trans is in the car. The ECU itself is interchangeable.

Hi b,

PMd.

Kanpai!; Thx,
#89

You make my spare parts reserve look like nothing! Extra points for the Summit box (I was born in Summit County, Ohio)!

Purchased several parts, arrived quickly and all intact. Thanks!