Page 1 of 1
Looking for a 93 SS TCU pin layout
Posted: Sun Feb 26, 2012 9:59 pm
by LGT Kirby
Trying to do a POWER mode mod, maybe some of you have heard of it.
I want to verify my pins before I go jamming wires in there hoping something works.
If you have a link handy, please post it!
Thanks.
Re: Looking for a 93 SS TCU pin layout
Posted: Mon Feb 27, 2012 12:02 am
by Legacy777
These are out of the 90 FSM.
http://www.main.experiencetherave.com/s ... _page1.jpg
http://www.main.experiencetherave.com/s ... _page2.jpg
The only difference between the 90 and the 92+ TCU is the following for the 92:
Connector 46, pin 7 - Brake Switch
Connector 46, pin 5 - ABS Signal
Re: Looking for a 93 SS TCU pin layout
Posted: Mon Feb 27, 2012 6:35 am
by LGT Kirby
Thank you!
Re: Looking for a 93 SS TCU pin layout
Posted: Mon Feb 27, 2012 6:28 pm
by Legacy777
You're welcome.
Re: Looking for a 93 SS TCU pin layout
Posted: Sat Mar 03, 2012 4:29 am
by wtdash
Hi,
If you haven't seen it, here's a post on the
power mod override switch.
FWIW, I had a '91 SS TCU and the power mode didn't work. I swapped in a '93 SS TCU and it did.
GL,
Td
